Linear Shaft, System of Measurement Inch, Diameter 2 in, Shaft Type Pre-Drilled Shaft, End Type Plain Ends, Core Type Solid, Overall Length 42 in, Surface Hardness - Minimum 70 HRC, Material Aluminum Alloy, Finish Ceramic Coated, End Thread Size Not Applicable, Mounting Hole Thread Size 1/2-13, Diameter Tolerance - Minimum -0.001 in, Diameter Tolerance - Maximum 0 in, Mounting Hole Center to Center 8 in, Mounting Hole Center to Shaft End 4 in, End Thread Length Not Applicable
| Item | Linear Shaft |
|---|---|
| Shaft Dia. | 2 in |
| Length | 42 in |
| Material | Aluminum Alloy |
| Travel Length (In.) | 42 |
| Min. Surface Hardness | 70 RC |
| Mounting Hole Center to Center | 8 in |
| Dia. Tolerance Min. | 1.999 in |
| Mounting Holes | Tapped |
| For Use With | Lined Bearings, Pillow Blocks |
| Dia. Tolerance Max. | 2 in |
| Temp. Range (F) | 0 Degrees to 400 Degrees F |
| Mounting Hole from Shaft End | 1 in |
| Finish | Ceramic Coated |
| Thread Size | 1/2"-13 |
| Type | Pre-Drilled Shaft |
| System of Measurement | Inch |
| Diameter | 2 in |
| End Thread Size | Not Applicable |
| Surface Hardness - Minimum | 70 HRC |
| Series | CCPDL |
| Mounting Hole Type | Tapped |
| Shaft Type | Pre-Drilled Shaft |
| End Thread Diameter | Not Applicable |
| Mounting Hole Center to Shaft End | 4 in |
| Weight Per Inch | 0.308 lb |
| Length Tolerance | 0.06 in |
| Diameter Tolerance - Maximum | 0 in |
| Operating Temperature - Minimum | 0 deg F |
| Overall Length | 42 in |
| End Type | Plain Ends |
| Core Type | Solid |
| Operating Temperature - Maximum | 400 deg F |
| End Thread Length | Not Applicable |
| Mounting Hole Thread Size | 1/2-13 |
| Mounting Hole Diameter | 1/2 in |
| Diameter Tolerance - Minimum | -0.001 in |
| Weight Per Meter | Not Applicable |
| Wire Rope Length | 42 in |
| Shell Material | Aluminum Alloy |
| Compatible Product Type | Lined Bearings, Pillow Blocks |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |