The material tester is a measuring device for the non-destructive measurement of coatings varnishes, paints, plastics ... on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached. The menu navigation of the coating thickness gauge allows easy adjustment and setting to new parameters and makes this handy coating thickness gauge an indispensable measuring device for control measurements in production, workshop and quality assurance. The material tester is also ideal for immediately determining and assessing accident damage to vehicles, for example, but the coating thickness gauge can also be used optimally in the industrial sector for incoming and outgoing inspection and material testing in production. The ergonomically designed material tester with external sensor allows you to rapidly determine measurement results with high accuracy. The coating thickness gauge measures non-magnetic layers such as paint, plastic, chrome, copper, zinc, enamel, etc. on steel/iron, as well as non-conductive layers such as paint, plastic, enamel, paper, glass, rubber, etc. on copper, aluminum , brass and stainless steel, as well as anodized aluminum.
| Includes | 3 x AAA batteries, 1 x Instruction manual, 1 x Carrying case, 1 x Set of standard foils, 1 x Calibration plates (Fe and NFe) |
|---|---|
| Accuracy | ±(2 % of reading + 1 µm) |
| Measuring Range | 0 to 1,500 um, 0 to 1,500 um |
| Application | Measuring device for the non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. |
| For Use With | Measuring device for the non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. |
| Alarm | Display when the adjustable upper and lower alarm limits are exceeded |
| Min. Radius of Curvature Convex | 5 mm / 0.19" |
| Features | For measurements on iron/steel and nonferrous metals, Measurements cannot be influenced by vibrations, Practical Vgroove on the measuring heads, Ergonomic design, Warning message for measurements outside the maximum measuring range, Wearresistant, springmounted measuring head for precise measuring results, |
| Min. Substrate Thickness | 0.2 mm / 0.008" (on magnetic materials), 0.05 mm / 0.002" (on non-magnetic materials) |
| Units | mils, µm, mm |
| Width | 5.6 in |
| Data Transfer | USB 2.0 |
| Memory | A volatile measuring group (DIR mode), Four measuring groups with autom. storage and max. 2000 readings (GEN mode) |
| Length | 2.8 in |
| Special Feature | Automatic mode with material detection (Fe + NFe), Magnetic mode (Fe), Eddy current mode (NFe) |
| Min. Radius of Curvature Concave | 25 mm / 0.98" |
| Resolution | 0.1 µm (<100 µm), 1 µm (>100 µm) |
| Min. Measuring Surface | Ø17 mm / 0.67" |
| Statistical Functions | Number of measured values, mean, minimum, maximum, standard deviation |
| Calibration | Multipoint calibration (1 - 4 points for each group), Zero-point calibration |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |