Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 5/16 in, Bore Diameter 2 3/16 in, Coupling Material Stainless Steel, Coupling Outside Diameter 7/8 in, Maximum Speed 6,000 RPM, Maximum Torque 22 in-lb, Axial Motion 0.005 in, Overall Length 1 1/16 in, Parallel Misalignment 0.008 in, System of Measurement Inch, Different Bore Sizes Yes, Torsional Stiffness 7.41 in-lb/Deg, Bore Type Round, Shaft Locking Type Set Screw, Number of Beams 4, Length Through Bore 2 0.5 in
| Shaft Locking Type - Couplings | 1 Piece Set Screw |
|---|---|
| Item | Motion Control Coupling |
| System of Measurement | Inch |
| Bore Dia. | 5/16 in x 3/16 in |
| Material - Couplings | Stainless Steel |
| Outside Dia. | 7/8 in |
| Overall Length | 1-1/16 in |
| Finish | Bright |
| Max. RPM | 6,000 |
| Setscrew Location | 2 |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.135 |
| Item - Motion Control Couplings | Motion Control Coupling |
| Clearance Dia. (In.) | 5/8 |
| Screw Size (mm) | M4 |
| Torque (In.-Lbs.) | 22 |
| Max. Axial Misalignment (In.) | +/-0.005 |
| Style | 4-Beam Set Screw |
| Max. Angular Misalignment | 3 deg |
| Max. Temp. Range (F) | 350 Degrees |
| Outside Dia. (In.) | 7/8 |
| Overall Length (In.) | 1.063 |
| Outside Dia. (mm) | 22.2 |
| Screw Size | M4 |
| Material | Stainless Steel |
| Length through Bore (In.) | 0.45 |
| Max. Bore (In.) | 0.313 |
| Screw Type | Set Screw |
| Rated Torque | 22 in-lb |
| Max. Parallel Misalignment (In.) | 0.008 |
| Clearance Dia. (mm) | 15.9 |
| Length through Bore (mm) | 11.43 |
| Length through Bore | 0.45 in |
| Min. Bore (In.) | 0.188 |
| Max. Temp. | 350 deg F |
| Overall Length (mm) | 27 |
| Size | PSR14 |
| Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
| Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
| Screw Material | Alloy Steel |
| Bore Tolerance | +0.001/-0.000 in |
| Coupling Material | Stainless Steel |
| Bore Diameter 1 | 5/16 in |
| Coupling Outside Diameter | 7/8 in |
| Angular Misalignment | 3 deg |
| Moment of Inertia | 0.0157 lb-in sq |
| For Misalignment Type | Angular, Parallel, Axial |
| Full Bearing Support Required | Yes |
| Number of Locking Screws | 4 |
| Bore Diameter 2 | 3/16 in |
| Length Through Bore 1 | 1/2 in |
| Coupling Material Finish | Bright |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
| Series | PSR |
| Maximum Speed | 6,000 RPM |
| Maximum Operating Temperature | 350 deg F |
| Different Bore Sizes | Yes |
| Torsional Stiffness | 7.41 in-lb/Deg |
| For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
| Maximum Torque | 22 in-lb |
| Screw Thread Size | M4 |
| Screw Material Finish | Black Oxide |
| Fastener Tightening Torque | 1.76 N-m |
| Included Screws | (4) Set Screw |
| Dynamic Torque Reversing | 5.5 in-lb |
| Length Through Bore 2 | 1/2 in |
| Parallel Misalignment | 0.008 in |
| Zero Backlash | Yes |
| Number of Beams | 4 |
| Axial Motion | 0.005 in |
| Minimum Operating Temperature | -40 deg F |
| Coupling Material Grade | 303 |
| Dynamic Torque Non-Reversing | 11 in-lb |
| Bore Type | Round |
| Shaft Locking Type | Set Screw |
| Wire Rope Length | 1-1/16 in |
| Length | 1-1/16 in |
| Fits Chest Size | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |