Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 1/2 in, Bore Diameter 2 5/16 in, Coupling Material Stainless Steel, Coupling Outside Diameter 1 1/4 in, Maximum Speed 6,000 RPM, Maximum Torque 107 in-lb, Axial Motion 0.01 in, Overall Length 1 3/4 in, Parallel Misalignment 0.015 in, System of Measurement Inch, Different Bore Sizes Yes, Torsional Stiffness 27.03 in-lb/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 0.8 in
| Shaft Locking Type - Couplings | 1 Piece Clamp |
|---|---|
| Bore Dia. | 1/2 in x 5/16 in |
| Rated Torque | 107 in-lb |
| Max. RPM | 6,000 |
| Outside Dia. | 1-1/4 in |
| Overall Length | 1-3/4 in |
| Material - Couplings | Stainless Steel |
| Max. Parallel Misalignment (In.) | 0.015 |
| Length through Bore | 7/8 in |
| Material | Stainless Steel |
| Max. Temp. | 350 deg F |
| Clearance Dia. (In.) | 1.459 |
| Length through Bore (In.) | 7/8 |
| Max. Angular Misalignment | 3 deg |
| Screw Size (mm) | M6 |
| Overall Length (In.) | 1-3/4 |
| Item - Motion Control Couplings | Motion Control Coupling |
| Max. Axial Misalignment (In.) | +/-0.01 |
| Item | Motion Control Coupling |
| Outside Dia. (In.) | 1-1/4 |
| Screw Size | M6 |
| Finish | Bright |
| Max. Temp. Range (F) | 350 |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.037 |
| Screw Type | Cap Screw |
| Torque (In.-Lbs.) | 107 |
| Style | 6 Beam Clamp |
| Axial Motion | 0.01 in |
| Dynamic Torque Reversing | 26.75 in-lb |
| Bore Tolerance | +0.001/-0.000 in |
| Dynamic Torque Non-Reversing | 53.5 in-lb |
| Screw Material | Alloy Steel |
| Moment of Inertia | 0.1094 lb-in sq |
| Maximum Operating Temperature | 350 deg F |
| Minimum Operating Temperature | -40 deg F |
| Different Bore Sizes | Yes |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Parallel Misalignment | 0.015 in |
| For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
| For Misalignment Type | Parallel, Angular, Axial |
| Zero Backlash | Yes |
| Maximum Torque | 107 in-lb |
| Maximum Speed | 6,000 rpm |
| Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
| Number of Beams | 6 |
| Screw Material Finish | Black Oxide |
| Series | FCR |
| Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
| Coupling Material | Stainless Steel |
| Coupling Material Finish | Bright |
| Full Bearing Support Required | Yes |
| Coupling Outside Diameter | 1-1/4 in |
| Screw Thread Size | M5 |
| Fastener Tightening Torque | 9.5 N-m |
| Number of Locking Screws | 2 |
| Angular Misalignment | 3 deg |
| Coupling Material Grade | 303 |
| Bore Type | Round |
| Length Through Bore 2 | 0.8 in |
| Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
| Shaft Locking Type | Clamp On |
| Bore Diameter 2 | 5/16 in |
| Included Screws | Hex Socket Cap Screw |
| Torsional Stiffness | 27.03 in-lb/Deg |
| System of Measurement | Inch |
| Bore Diameter 1 | 1/2 in |
| Length Through Bore 1 | 0.8 in |
| Wire Rope Length | 1-3/4 in |
| Length | 1-3/4 in |
| Fits Chest Size | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single or Four Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Spiral Coupling With Nypatch Anti-Vibration Hardware, Two Sets of Three Spiral Cuts, Zero-Backlash |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |