Motion Control Coupling Hub, Angular Misalignment 0.5 Degrees , Axial Motion 0.2 mm, Coupling Size MOCT51, Outside Diameter 57.2 mm, Over-Standard Parallel Misalignment 5.72 mm, Parallel Misalignment 0.25 mm, Coupling Overall Length 78.7 mm, Hub Material Aluminum, Length through Bore 28.7 mm, System of Measurement Metric, Bore Diameter 19 mm, Maximum Speed 4,500 RPM, Bore Type Round, Shaft Locking Type Clamp On, Keyway Depth Not Applicable, Keyway Width Not Applicable
| Item | Motion Control Coupling Hub |
|---|---|
| Shaft Locking Type - Couplings | 1 Piece Clamp |
| System of Measurement | Metric |
| Bore Dia. | 19 mm |
| Outside Dia. | 57.2 mm |
| With Keyway / Without Keyway | Without Keyway |
| Finish | Black Anodized |
| Assembled Coupling Length | 78.7 mm |
| Length through Bore (In.) | 1.13 |
| Length through Bore (mm) | 28.7 |
| Material - Hubs | Aluminum |
| Clearance Dia. (In.) | 2-1/4 |
| Size | MOCT57 |
| Screw Type | Cap Screw |
| Hub Dia. | 57.2 mm |
| Item - Oldham Coupling Hubs | Oldham Coupling Hub |
| Max. RPM | 4,500 |
| Overall Length (mm) | 28.7 |
| Max. Temp. Range (F) | Acetal Disk 150 Degrees F, Nylon Disk 130 Degrees F |
| Clearance Dia. (mm) | 57.2 |
| Outside Dia. (In.) | 2-1/4 |
| Outside Dia. (mm) | 57.2 |
| Style | Oldham Clamp |
| Material | Aluminum |
| Overall Length (In.) | 1.13 |
| Screw Size (mm) | M6 |
| Keyway Width | Not Applicable |
| Standards | Conflict Minerals Compliant, ISO 9001:2015, REACH Compliant, RoHS3 Compliant |
| Length through Bore | 28.7 mm |
| Bore Tolerance | +0.03 mm, -0.00 mm |
| Screw Material | Alloy Steel |
| Screw Seating Torque | 16 N-m |
| Coupling Size | MOCT51 |
| Keyway Depth | Not Applicable |
| Hub Material | Aluminum |
| Screw Material Finish | Black Oxide |
| Mechanical Fuse Break | Yes |
| Maximum Speed | 4,500 RPM |
| Bore Diameter | 19 mm |
| Screw Thread Size | M6 |
| Over-Standard Parallel Misalignment | 5.72 mm |
| Number of Locking Screws | 1 |
| Parallel Misalignment | 0.25 mm |
| Compatible Center Element Manufacturer Part Number | OD36/57-AT, OD36/57-PEK |
| Shaft Locking Type | Clamp On |
| Hub Material Finish | Black Anodized |
| Coupling Overall Length | 78.7 mm |
| Minimum Operating Temperature | -23 deg C |
| Features | Balanced Design |
| Included Screws | Clamp Screw |
| Outside Diameter | 57.2 mm |
| Zero Backlash | Yes |
| Angular Misalignment | 0.5 deg |
| Shaft Tolerance | +0.000 mm, -0.013 mm |
| Axial Motion | 0.2 mm |
| Full Bearing Support Required | Yes |
| Maximum Operating Temperature | 93 deg C |
| For Misalignment Type | Angular, Parallel, Axial |
| Set Screw Location | Not Applicable |
| Hub Material Grade | 2024 |
| Weight | 0.413 lb |
| Bore Type | Round |
| Fits Chest Size | Balanced Design |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |