Motion Control Coupling Hub, Angular Misalignment 0.5 Degrees , Axial Motion 0.008 in, Coupling Size OCC32, Outside Diameter 2 in, Over-Standard Parallel Misalignment 0.2 in, Parallel Misalignment 0.01 in, Coupling Overall Length 2.35 in, Hub Material Aluminum, Length through Bore 0.82 in, System of Measurement Inch, Bore Diameter 5/8 in, Maximum Speed 4,500 RPM, Bore Type Round Keyed, Shaft Locking Type Clamp On, Keyway Depth 3/32 in, Keyway Width 3/16 in, Screw Seating Torque 9.5 N-m
| Item | Motion Control Coupling Hub |
|---|---|
| Shaft Locking Type - Couplings | 1 Piece Clamp |
| System of Measurement | Inch |
| Bore Dia. | 5/8 in |
| Outside Dia. | 2 in |
| With Keyway / Without Keyway | With Keyway |
| Finish | Black Anodized |
| Clearance Dia. (mm) | 50.8 |
| Material - Hubs | Aluminum |
| Max. Bore (In.) | 5/8 |
| Max. RPM | 4,500 |
| Length through Bore (mm) | 20.8 |
| Overall Length (In.) | 0.82 |
| Max. Temp. Range (F) | Acetal Disk 150 Degrees F, Nylon Disk 130 Degrees F |
| Screw Size (mm) | M5 |
| Assembled Coupling Length | 2.35 in |
| Screw Type | Cap Screw |
| Size | OCC32 |
| Clearance Dia. (In.) | 2 |
| Item - Oldham Coupling Hubs | Oldham Coupling Hub |
| Overall Length (mm) | 20.8 |
| Length through Bore (In.) | 0.82 |
| Keyway (In.) | 3/16 |
| Standards | REACH Compliant, RoHS3 Compliant |
| Keyway Width | 3/16 in |
| Length through Bore | 0.82 in |
| Screw Seating Torque | 9.5 N-m |
| Bore Tolerance | +0.001/-0.000 in |
| Screw Material | Alloy Steel |
| Screw Thread Size | M5 |
| Compatible Center Element Manufacturer Part Number | OD32/51-AT, OD32/51-PEK |
| Parallel Misalignment | 0.01 in |
| Screw Material Finish | Black Oxide |
| For Misalignment Type | Angular, Parallel, Axial |
| Maximum Speed | 4,500 RPM |
| Shaft Locking Type | Clamp On |
| Included Screws | Clamp Screw |
| Hub Material | Aluminum |
| Shaft Tolerance | +0.000/-0.013 |
| Outside Diameter | 2 in |
| Number of Locking Screws | 1 |
| Bore Diameter | 5/8 in |
| Hub Material Finish | Black Anodized |
| Axial Motion | 0.008 in |
| Bore Type | Round Keyed |
| Keyway Depth | 3/32 in |
| Zero Backlash | Yes |
| Features | Balanced Design |
| Coupling Overall Length | 2.35 in |
| Over-Standard Parallel Misalignment | 0.2 in |
| Coupling Size | OCC32 |
| Hub Material Grade | 2024 |
| Mechanical Fuse Break | Yes |
| Angular Misalignment | 0.5 deg |
| Maximum Operating Temperature | 300 deg F |
| Full Bearing Support Required | Yes |
| Minimum Operating Temperature | -10 deg F |
| Weight | 0.233 lb |
| Fits Chest Size | Balanced Design |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |