Motion Control Coupling Hub, Angular Misalignment 0.5 Degrees , Axial Motion 0.1 mm, Coupling Size MOCC25, Outside Diameter 25.4 mm, Over-Standard Parallel Misalignment 2.54 mm, Parallel Misalignment 0.2 mm, Coupling Overall Length 31.8 mm, Hub Material Aluminum, Length through Bore 11.9 mm, System of Measurement Metric, Bore Diameter 8 mm, Maximum Speed 4,500 RPM, Bore Type Round Keyed, Shaft Locking Type Clamp On, Keyway Depth 1.1 mm, Keyway Width 2 mm, Screw Seating Torque 2.1 N-m
| Item | Motion Control Coupling Hub |
|---|---|
| Shaft Locking Type - Couplings | 1 Piece Clamp |
| System of Measurement | Metric |
| Bore Dia. | 8 mm |
| Outside Dia. | 25.4 mm |
| With Keyway / Without Keyway | With Keyway |
| Finish | Black Anodized |
| Keyway (mm) | 2 |
| Outside Dia. (In.) | 1 |
| Style | Oldham Clamp with Keyway |
| Overall Length (mm) | 11.9 |
| Item - Oldham Coupling Hubs | Oldham Coupling Hub |
| Max. RPM | 4,500 |
| Hub Dia. | 25.4 mm |
| Material - Hubs | Aluminum |
| Max. Temp. Range (F) | Acetal Disk 150 Degrees F, Nylon Disk 130 Degrees F |
| Clearance Dia. (In.) | 1 |
| Outside Dia. (mm) | 25.4 |
| Clearance Dia. (mm) | 25.4 |
| Length through Bore (mm) | 11.9 |
| Assembled Coupling Length | 31.8 mm |
| Length through Bore (In.) | 0.467 |
| Size | MOCC25 |
| Overall Length (In.) | 0.467 |
| Material | Aluminum |
| Screw Size (mm) | M3 |
| Screw Type | Cap Screw |
| Standards | REACH Compliant, RoHS3 Compliant |
| Keyway Width | 2 mm |
| Length through Bore | 11.9 mm |
| Screw Material | Alloy Steel |
| Screw Seating Torque | 2.1 N-m |
| Bore Tolerance | +0.03/-0.00 mm |
| Over-Standard Parallel Misalignment | 2.54 mm |
| Axial Motion | 0.1 mm |
| Outside Diameter | 25.4 mm |
| Hub Material Finish | Black Anodized |
| Included Screws | Clamp Screw |
| Hub Material | Aluminum |
| Angular Misalignment | 0.5 deg |
| Coupling Overall Length | 31.8 mm |
| Zero Backlash | Yes |
| Number of Locking Screws | 1 |
| For Misalignment Type | Angular, Parallel, Axial |
| Screw Thread Size | M3 |
| Bore Diameter | 8 mm |
| Maximum Operating Temperature | 300 deg F |
| Weight | 0.032 lb |
| Minimum Operating Temperature | -10 deg F |
| Full Bearing Support Required | Yes |
| Features | Balanced Design |
| Parallel Misalignment | 0.2 mm |
| Bore Type | Round Keyed |
| Compatible Center Element Manufacturer Part Number | OD16/25-AT, OD16/25-NL, OD16/25-PEK |
| Hub Material Grade | 2024 |
| Maximum Speed | 4,500 RPM |
| Screw Material Finish | Black Oxide |
| Mechanical Fuse Break | Yes |
| Shaft Locking Type | Clamp On |
| Keyway Depth | 1.1 mm |
| Shaft Tolerance | +0.000/-0.013 |
| Coupling Size | MOCC25 |
| Fits Chest Size | Balanced Design |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |