Motion Control Coupling Hub, Angular Misalignment 0.5 Degrees , Axial Motion 0.2 mm, Coupling Size MOCT57, Outside Diameter 57.2 mm, Over-Standard Parallel Misalignment 5.72 mm, Parallel Misalignment 0.25 mm, Coupling Overall Length 78.7 mm, Hub Material Aluminum, Length through Bore 28.7 mm, System of Measurement Metric, Bore Diameter 16 mm, Maximum Speed 4,500 RPM, Bore Type Round, Shaft Locking Type Clamp On, Keyway Depth Not Applicable, Keyway Width Not Applicable
| Item | Motion Control Coupling Hub |
|---|---|
| Shaft Locking Type - Couplings | 1 Piece Clamp |
| System of Measurement | Metric |
| Bore Dia. | 16 mm |
| Outside Dia. | 57.2 mm |
| With Keyway / Without Keyway | Without Keyway |
| Finish | Anodized Aluminum |
| Item - Oldham Coupling Hubs | Oldham Coupling Hub |
| Screw Type | Cap Screw |
| Max. RPM | 4,500 |
| Assembled Coupling Length | 78.7 mm |
| Max. Temp. Range (F) | 225 |
| Overall Length (mm) | 78.7 |
| Material - Hubs | Aluminum |
| Max. Angular Misalignment | 0.5 deg |
| Max. Parallel Misalignment (In.) | 0.01 |
| Clearance Dia. (mm) | 57.2 |
| Max. Axial Misalignment (In.) | +/-0.008 |
| Screw Size (mm) | M6 |
| Length through Bore (mm) | 28.7 |
| Standards | Conflict Minerals Compliant, ISO 9001:2015, REACH Compliant, RoHS3 Compliant |
| Keyway Width | Not Applicable |
| Length through Bore | 28.7 mm |
| Bore Tolerance | +0.03 mm, -0.00 mm |
| Screw Seating Torque | 16 N-m |
| Screw Material | Alloy Steel |
| Maximum Speed | 4,500 RPM |
| Number of Locking Screws | 1 |
| Maximum Operating Temperature | 93 deg C |
| Zero Backlash | Yes |
| Hub Material | Aluminum |
| Coupling Size | MOCT57 |
| Screw Thread Size | M6 |
| Angular Misalignment | 0.5 deg |
| Full Bearing Support Required | Yes |
| Shaft Locking Type | Clamp On |
| Compatible Center Element Manufacturer Part Number | OD36/57-AT, OD36/57-PEK |
| Parallel Misalignment | 0.25 mm |
| Coupling Overall Length | 78.7 mm |
| Outside Diameter | 57.2 mm |
| Set Screw Location | Not Applicable |
| Bore Type | Round |
| Screw Material Finish | Black Oxide |
| Hub Material Grade | 2024 |
| Features | Balanced Design |
| Shaft Tolerance | +0.000 mm, -0.013 mm |
| Over-Standard Parallel Misalignment | 5.72 mm |
| Axial Motion | 0.2 mm |
| For Misalignment Type | Angular, Parallel, Axial |
| Hub Material Finish | Black Anodized |
| Mechanical Fuse Break | Yes |
| Minimum Operating Temperature | -23 deg C |
| Included Screws | Clamp Screw |
| Weight | 0.426 lb |
| Bore Diameter | 16 mm |
| Keyway Depth | Not Applicable |
| Fits Chest Size | Balanced Design |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |