Rigid Shaft Coupling, Bore Diameter 1 1 1/8 in, Bore Diameter 2 1 1/8 in, Bore Type Round Keyed, Clearance Diameter 2.18 in, Coupling Construction Two-Piece, Coupling Material Stainless Steel, Coupling Outside Diameter 1 7/8 in, Different Bore Sizes No, Keyway Depth 1 1/8 in, Keyway Depth 2 1/8 in, Minimum Bore Diameter 1 1/8 in, Keyway Width 1 1/4 in, Keyway Width 2 1/4 in, Maximum Bore Diameter 1 1/8 in, Maximum Speed 4,000 RPM, Maximum Torque 1,325 in-lb, Overall Length 3 1/8 in
| Shaft Locking Type - Couplings | 2 Piece Clamp |
|---|---|
| Item | Rigid Shaft Coupling |
| System of Measurement | Inch |
| Bore Dia. | 1 1/8 in |
| Material - Couplings | Stainless Steel |
| Outside Dia. | 1-7/8 in |
| Overall Length | 3-1/8 in |
| With Keyway / Without Keyway | With Keyway |
| Finish | Bright |
| Design | Four Vibration Resistant Socket Capscrews |
| Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
| Screw Size | 1/4"-28 |
| Clearance Dia. (In.) | 2.182 |
| Type | Two Piece Clamp Type, with Keyway |
| Screw Size (In.) | 1/4-28 |
| Standards | ANSI, Conflict Minerals Compliant, REACH Compliant, RoHS3 Compliant |
| Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
| Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
| Max. Torque | 1,325 in-lb |
| Clearance Dia. | 2.182 in |
| Keyway Width | 1/4 in |
| Machined From | Bar Stock |
| Material | Stainless Steel |
| Keyway Width (In.) | 1/4 |
| Max. Torque (In.-Lbs.) | 1,325 |
| Bore Tolerance | +0.0005 in, +0.0020 in |
| Screw Material | Stainless Steel |
| Keyway Depth 2 | 1/8 in |
| Maximum Operating Temperature | 350 deg F |
| Maximum Bore Diameter | 1-1/8 in |
| Features | Precision Honed Bores, Vibration-Resistant Screws |
| Different Bore Sizes | No |
| Coupling Outside Diameter | 1-7/8 in |
| Minimum Bore Diameter | 1-1/8 in |
| Minimum Operating Temperature | -40 deg F |
| Included Screws | (8) Clamp Screws |
| Resistance Properties | Corrosion Resistant |
| Zero Backlash | Yes |
| Shaft Locking Type | Clamp On |
| Number of Locking Screws | 8 |
| Bore Type | Round Keyed |
| Bore Diameter 2 | 1-1/8 in |
| Screw Thread Size | 1/4"-28 |
| Screw Material Finish | Bright |
| Maximum Speed | 4,000 RPM |
| Screw Location from Center | 0.748 in |
| Coupling Material | Stainless Steel |
| Fastener Tightening Torque | 110 in-lb |
| Keyway Width 1 | 1/4 in |
| Maximum Torque | 1,325 in-lb |
| Clearance Diameter | 2.18 in |
| Keyway Depth 1 | 1/8 in |
| Coupling Material Grade | 303 |
| Recommended Gap | 0.094 in |
| Coupling Construction | Two-Piece |
| Shaft Tolerance | +0.0000 in, -0.0005 in |
| Keyway Width 2 | 1/4 in |
| Bore Diameter 1 | 1-1/8 in |
| Screw Material Grade | 18-8 300 Series |
| Coupling Material Finish | Bright |
| Wire Rope Length | 3-1/8 in |
| Length | 3-1/8 in |
| Fits Chest Size | Precision Honed Bores, Vibration-Resistant Screws |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |