Acoplamiento de control de movimiento, desalineación angular 3 grados, diámetro de barreno 1 8 mm, diámetro de barreno 2 8 mm, material del acoplamiento acero inoxidable, diámetro exterior del acoplamiento 31.8 mm, velocidad máxima 6,000 RPM, par máximo 9.72 N-m, movimiento axial 0.25 mm, longitud total 38.1 mm, desalineación paralela 0.38 mm, sistema de medición métrico, tamaños de barreno diferentes no, rigidez torsional 3.03 N-m/Deg, tipo de barreno redondo, tipo de bloqueo del eje abrazadera, número de vigas 4, longitud a través del barreno 2 17.6 mm
| Shaft Locking Type - Couplings | 1 Piece Clamp |
|---|---|
| Item | Motion Control Coupling |
| System of Measurement | Metric |
| Bore Dia. | 8mm x 8mm |
| Material - Couplings | Stainless Steel |
| Outside Dia. | 31.8 mm |
| Overall Length | 38.1 mm |
| Finish | Bright |
| Outside Dia. (In.) | 1-1/4 |
| Min. Bore (mm) | 8 |
| Max. Bore (mm) | 8 |
| Overall Length (In.) | 1-1/2 |
| Rated Torque | 86 in-lb |
| Overall Length (mm) | 38.1 |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.037 |
| Max. Angular Misalignment | 3 deg |
| Screw Size (mm) | M4 |
| Screw Type | Cap Screw |
| Clearance Dia. (In.) | 1-1/4 |
| Torque (In.-Lbs.) | 86 |
| Max. Axial Misalignment (In.) | +/-0.01 |
| Max. Temp. | 350 deg F |
| Screw Size | M4 |
| Clearance Dia. (mm) | 31.8 |
| Style | 4-Beam Clamp |
| Length through Bore (In.) | 0.67 |
| Max. RPM | 6,000 |
| Size | PCMR32 |
| Length through Bore (mm) | 17.02 |
| Item - Motion Control Couplings | Motion Control Coupling |
| Length through Bore | 17.02 mm |
| Max. Temp. Range (F) | 350 Degrees |
| Material | Stainless Steel |
| Outside Dia. (mm) | 31.8 |
| Max. Parallel Misalignment (In.) | 0.015 |
| Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
| Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
| Bore Tolerance | +0.025/-0.000 mm |
| Screw Material | Alloy Steel |
| Coupling Material Finish | Bright |
| Bore Diameter 1 | 8 mm |
| Dynamic Torque Reversing | 2.43 N-m |
| Coupling Outside Diameter | 31.8 mm |
| Zero Backlash | Yes |
| Coupling Material | Stainless Steel |
| Full Bearing Support Required | Yes |
| Maximum Speed | 6,000 RPM |
| Series | PCMR |
| Dynamic Torque Non-Reversing | 4.86 N-m |
| Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
| Screw Material Finish | Black Oxide |
| Maximum Torque | 9.72 N-m |
| Parallel Misalignment | 0.38 mm |
| Torsional Stiffness | 3.03 N-m/Deg |
| Shaft Locking Type | Clamp On |
| Moment of Inertia | 0 kgf/m sq |
| Length Through Bore 1 | 17.6 mm |
| Angular Misalignment | 3 deg |
| Different Bore Sizes | No |
| Coupling Material Grade | 303 |
| Fastener Tightening Torque | 4.6 N-m |
| Maximum Operating Temperature | 176 deg C |
| Bore Type | Round |
| Bore Diameter 2 | 8 mm |
| Number of Beams | 4 |
| Shaft Tolerance | +0.000/-0.013 mm |
| Axial Motion | 0.25 mm |
| Included Screws | (2) Hex Socket Cap Screw |
| For Misalignment Type | Angular, Parallel, Axial |
| Length Through Bore 2 | 17.6 mm |
| Screw Thread Size | M4 |
| Number of Locking Screws | 2 |
| For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
| Minimum Operating Temperature | -40 deg C |
| Wire Rope Length | 38.1 mm |
| Length | 38.1 mm |
| Fits Chest Size | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
| Shell Material | Stainless Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |