Acoplamiento de control de movimiento, desalineación angular 3 grados, diámetro de perforación 1 11 mm, diámetro de perforación 2 11 mm, material del acoplamiento aluminio, diámetro exterior del acoplamiento 28.6 mm, velocidad máxima 6,000 RPM, par máximo 3.84 N-m, movimiento axial 0.25 mm, longitud total 38.1 mm, desalineación paralela 0.38 mm, sistema de medición métrico, tamaños de perforación diferentes No, rigidez torsional 0.51 N-m/Deg, tipo de perforación redonda, tipo de bloqueo del eje tornillo de fijación, número de vigas 4, longitud a través de la perforación 2 17.6 mm
| Shaft Locking Type - Couplings | 1 Piece Set Screw |
|---|---|
| Item | Motion Control Coupling |
| System of Measurement | Metric |
| Bore Dia. | 11mm x 11mm |
| Material - Couplings | Aluminum |
| Outside Dia. | 28.6 mm |
| Overall Length | 38.1 mm |
| Finish | Bright |
| Max. Axial Misalignment (In.) | +/-0.01 |
| Overall Length (In.) | 1-1/2 |
| Material | Aluminum |
| Clearance Dia. (In.) | 5/8 |
| Max. Angular Misalignment | 3 deg |
| Clearance Dia. (mm) | 15.9 |
| Torsional Stiffness (Deg./In.-Lbs.) | 0.221 |
| Screw Type | Set Screw |
| Setscrew Location | 2 |
| Overall Length (mm) | 38.1 |
| Length through Bore | 17.02 mm |
| Torque (In.-Lbs.) | 34 |
| Size | PSMR29 |
| Max. Bore (mm) | 11 |
| Length through Bore (mm) | 17.02 |
| Rated Torque | 34 in-lb |
| Screw Size (mm) | M5 |
| Screw Size | M5 |
| Min. Bore (mm) | 11 |
| Max. Temp. | 225 deg F |
| Item - Motion Control Couplings | Motion Control Coupling |
| Outside Dia. (In.) | 1-1/8 |
| Length through Bore (In.) | 0.67 |
| Style | 4-Beam Set Screw |
| Max. RPM | 6,000 |
| Outside Dia. (mm) | 28.6 |
| Max. Parallel Misalignment (In.) | 0.015 |
| Max. Temp. Range (F) | 225 Degrees |
| Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS Compliant |
| Application | Light-Duty Power Transmission, Servo Motors to Lead Screws |
| Bore Tolerance | +0.025/-0.000 mm |
| Screw Material | Alloy Steel |
| Bore Diameter 2 | 11 mm |
| Coupling Outside Diameter | 28.6 mm |
| Coupling Material Grade | 7075 |
| Dynamic Torque Non-Reversing | 1.92 N-m |
| Shaft Locking Type | Set Screw |
| Dynamic Torque Reversing | 0.96 N-m |
| Minimum Operating Temperature | -40 deg C |
| Maximum Speed | 6,000 RPM |
| Number of Locking Screws | 4 |
| Length Through Bore 2 | 17.6 mm |
| Series | PSMR |
| Angular Misalignment | 3 deg |
| Moment of Inertia | 0 kgf/m sq |
| Included Screws | (4) Set Screw |
| Coupling Material Finish | Bright |
| Different Bore Sizes | No |
| Maximum Operating Temperature | 107 deg C |
| Parallel Misalignment | 0.38 mm |
| Bore Type | Round |
| Bore Diameter 1 | 11 mm |
| Torsional Stiffness | 0.51 N-m/Deg |
| Zero Backlash | Yes |
| Fastener Tightening Torque | 4 N-m |
| Full Bearing Support Required | Yes |
| Axial Motion | 0.25 mm |
| Screw Material Finish | Black Oxide |
| Length Through Bore 1 | 17.6 mm |
| For Environment | Angular Misalignment, Axial Motion, Parallel Misalignment |
| Shaft Tolerance | +0.000/-0.013 mm |
| Screw Thread Size | M5 |
| Features | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
| Coupling Material | Aluminum |
| For Misalignment Type | Angular, Parallel, Axial |
| Maximum Torque | 3.84 N-m |
| Number of Beams | 4 |
| Wire Rope Length | 38.1 mm |
| Length | 38.1 mm |
| Fits Chest Size | Balanced Design for Reduced Vibration, Higher Torque Capacity, Larger Body Sizes than Single Beam Couplings, Lower Windup, Machined from a Single Piece of Material, Two Sets of Two Spiral Cuts, Zero-Backlash |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |