Shaft Collar, Industry Standard Size N10, Bore Thread Size 1.967 In.-18, Nut Outside Diameter 2 7/8 in, Face Diameter 2 7/16 in, Nut Width 1/2 in, Bearing Face Maximum TIR 0.001 in, Nut Material Carbon Steel, Nut Material Grade 1215, System of Measurement Inch, Resistance Properties Corrosion-Resistant, Screw Location from Center 1.18 in, Screw Material Alloy Steel, Maximum Operating Temperature 350 Degrees F, Minimum Operating Temperature -40 Degrees F
| Number of Pieces | 1 |
|---|---|
| Collar Style | Bearing Locknut |
| Screw Size | M5 x 16 |
| Operating Temp. Range | -40 to 350 deg F |
| Screw Material | Alloy Steel |
| System of Measurement | Inch |
| Item | Shaft Collar |
| Standards | Conflict Minerals Compliant, REACH Compliant, RoHS3 Compliant |
| Screw Seating Torque | 9.5 N-m |
| Bore Diameter | 1.967 in |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Thread Spacing | Fine |
| Nut Material | Carbon Steel |
| Nut Construction | 1-Piece Clamp-On |
| Screw Material Finish | Black Oxide |
| Maximum Operating Temperature | 350 deg F |
| Screw Thread Size | M5x0.80 |
| Nut Width | 1/2 in |
| Nut Material Finish | Black Oxide |
| Face Diameter | 2-7/16 in |
| Nut Locking Type | Clamping Socket Cap Screw |
| Bearing Face Maximum TIR | 0.001 in |
| Nut Material Grade | 1215 |
| Resistance Properties | Corrosion-Resistant |
| Industry Standard Size | N10 |
| Minimum Operating Temperature | -40 deg F |
| Screw Location from Center | 1.18 in |
| Nut Outside Diameter | 2-7/8 in |
| Bore Thread Size | 1.967"-18 |
| Bore Type | Threaded |
| Number of Screws | 1 |
| Weight | 0.4686 lb |
| Collar Width | 1/2 in |
| Collar Construction | Clamp |
| Collar Outside Diameter | 2-7/8 in |
| Collar Material | 1215 Lead Free Steel |
| Industry Number | N10 |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |