Shaft Collar, System of Measurement Inch, Bore Type Threaded, Bore Diameter 1 in, Bore Thread Size 1 In.-14, Collar Outside Diameter 1 3/4 in, Inside Height to Flat Not Applicable, Clearance Diameter 2.03 in, Collar Width 1/2 in, Collar Material Stainless Steel, Keyway Width Not Applicable, Collar Material Grade 303, Keyway Depth Not Applicable, Thread Direction Right Hand Thread, Center to Lever Top Not Applicable, Collar Construction 1-Piece, Screw Material Stainless Steel
| Number of Pieces | 1 |
|---|---|
| Collar Style | Clamp, Threaded |
| Screw Size | 1/4"-28 |
| Operating Temp. Range | -40 to 350 deg F |
| Screw Material | Stainless Steel |
| Item | Shaft Collar |
| Standards | ANSI, Conflict Minerals Compliant, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| System of Measurement | Inch |
| Bore Tolerance | Not Applicable |
| Distance Across Flats | Not Applicable |
| Width Tolerance | +0.003/-0.010 in |
| Screw Seating Torque | 110 lb-in |
| Component Mount Type | Not Applicable |
| Handle Material | Not Applicable |
| Collar Outside Diameter | 1-3/4 in |
| Bore Thread Size | 1"-14 |
| Screw Thread Size | 1/4"-28 |
| For Shaft Diameter | 1 in |
| Collar Construction | 1-Piece |
| Screw Location from Center | 0.68 in |
| Collar Material Finish | Bright |
| Bore Width | Not Applicable |
| Collar Material Grade | 303 |
| Lever Length | Not Applicable |
| Keyway Width | Not Applicable |
| Thread Direction | Right Hand Thread |
| Resistance Properties | Corrosion-Resistant |
| Handle Color | Not Applicable |
| Flat to Bore | Not Applicable |
| Bore Type | Threaded |
| Shaft Locking Type | Clamp On |
| Collar Width | 1/2 in |
| Lever Part Number | Not Applicable |
| Minimum Operating Temperature | -40 deg F |
| Maximum Operating Temperature | 350 deg F |
| Screw Material Finish | Bright |
| Lever Height | Not Applicable |
| Inside Height to Flat | Not Applicable |
| Center to Lever Top | Not Applicable |
| Bore Diameter | 1 in |
| Screw Material Grade | 304 |
| Included Screws | Socket Cap Screw |
| Mount Hole Thread Size | Not Applicable |
| Handle Material Finish | Not Applicable |
| Keyway Depth | Not Applicable |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Collar Material | Stainless Steel |
| Clearance Diameter | 2.03 in |
| Number of Screws | 1 |
| Weight | 0.2337 lb |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |