Rod Anchor, System of Measurement Inch, Mount Type Vertical, Screw Size 1/4 in, Overall Length 3 in, Material Steel, Finish Zinc Plated, Drive Type Hex, Maximum Load Capacity 970 lb, Compatible Material Steel, Compatible Rod Thread Size 3/8 In.-16, Drill Bit Size 5/8 in, Minimum Material Thickness 1/32 in, ICC Approved for Cracked Concrete No, ICC Approved for Un-Cracked Concrete No, Seismic Approved No, Anchor Diameter 1/4 in, Body Length 3 in, Maximum Material Thickness 3/16 in
| Item | Rod Anchor |
|---|---|
| Mount Type | Vertical |
| Compatible Material | Steel |
| Screw Size | 1/4 in |
| Overall Length | 3 in |
| Material | Steel |
| Finish | Zinc Plated |
| Drive Type | Hex |
| Drill Bit Size | 5/8 in |
| Maximum Load Capacity | 970 lb |
| ICC Approved for Cracked Concrete | No |
| ICC Approved for Un-Cracked Concrete | No |
| Seismic Approved | No |
| Point Type | Teks 3 |
| System of Measurement | Inch |
| Minimum Material Thickness | 1/32 in |
| Features | Install using the Sammy Nut Driver with an 18V Cordless Drill/Driver |
| Compatible Rod Thread Size | 3/8"-16 |
| Maximum Material Thickness | 3/16 in |
| Thread Size | 1/4"-14 |
| Body Length | 3 in |
| Anchor Diameter | 1/4 in |
| Wire Rope Length | 3 in |
| Length | 3 in |
| Shell Material | Steel |
| Country of Origin (subject to change) | United States |
| Package Quantity | 25 |