Double Diaphragm Pump, Air Consumption (Maximum) Not Applicable, Air Intake Connection Size 1/4 in, Air Intake Connection Type FNPT, Check Seat Material Polypropylene, Diaphragm Material Santoprene, Feet of Head (Maximum) 231 ft, Flow Rate (Maximum) 5 gpm, Manifold Connection Single Port, Media Discharge Connection Size 1/4 in, Media Discharge Connection Type NPT, Media Discharge Location Top, Media Intake Connection Size 1/4 in, Media Intake Connection Type NPT, Media Intake Location Bottom
| Item | Double Diaphragm Pump |
|---|---|
| Housing Material - Pumps | Acetal |
| Pump Assembly Type | Bolt |
| Manifold Connection | Single Port |
| Valve Material | Santoprene |
| Valve Type | Ball |
| Air Consumption (Maximum) | Not Applicable |
| Air Intake Connection Size | 1/4 in |
| Air Intake Connection Type | FNPT |
| Check Seat Material | Polypropylene |
| Diaphragm Material | Santoprene |
| Media Temperature (Maximum) | 275 deg F |
| Media Temperature (Minimum) | 40 deg F |
| Operating Pressure (Maximum) | 100 psi |
| Standards | CE Marked, ISO |
| Manufacturers Warranty Length | 5 yr |
| Pump Operation Type | Air |
| Inlet/Outlet | 1/4 in |
| Agency Compliance | ATEX, EN 809 |
| Overall Height | 7.9 in |
| Overall Width | 7-1/2 in |
| Flow Rate @ 120 psi | Not Applicable |
| Manifold Connection Type | NPT |
| Flow Rate @ 100 psi | 4.9 gpm |
| Media Intake Location | Bottom |
| Flow Rate @ 20 psi | 2.9 gpm |
| Flow Rate @ 60 psi | 4.4 gpm |
| Media Discharge Connection Type | NPT |
| Media Discharge Location | Top |
| Flow Rate @ 50 psi | Not Applicable |
| Solid Diameter (Maximum) | 0.03 in |
| Media Intake Connection Size | 1/4 in |
| For Use With Potable Systems | No |
| Feet of Head (Maximum) | 231 ft |
| Overall Length | 5-1/2 in |
| Flow Rate @ 15 psi | Not Applicable |
| Priming | Self-Priming |
| NPSHr | 5 ft of head |
| Flow Rate @ 90 psi | Not Applicable |
| Flow Rate (Maximum) | 5 gpm |
| Media Discharge Connection Size | 1/4 in |
| Series Family | PB |
| Flow Rate @ 80 psi | 4.8 gpm |
| Flow Rate @ 70 psi | Not Applicable |
| Wetted Housing Material | Acetal |
| Flow Rate @ 30 psi | Not Applicable |
| Chemical Compatibility | Ammonium Hydroxide, Calcium Carbonate, Hydrochloric Acid 10%, Hydrochloric Acid 20%, Hydrochloric Acid 30%, Phosphoric Acid 40%, Phosphoric Acid 50%, Potassium Hydroxide 50%, Sodium Hydroxide 10%, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Sodium Hydroxide 80%, Sulfuric Acid 10%, Sulfuric Acid 20%, Sulfuric Acid 30%, Sulfuric Acid 40%, Sulfuric Acid 50%, Sulfuric Acid 60%, Sulfuric Acid 70%, Sulfuric Acid 80%, Water |
| Flow Rate @ 40 psi | 4.2 gpm |
| Air Intake Pressure (Maximum) | 100 psi |
| Media Intake Connection Type | NPT |
| Flow Rate @ 10 psi | Not Applicable |
| Phase | Not Applicable |
| Mounting Hardware Material | Stainless Steel |
| Series | PB 1/4 |
| Includes | Not Applicable |
| Solenoid Voltage | Not Applicable |
| Diaphragm Backing Material | Not Applicable |
| Wetted Body Material | Acetal |
| Fluid Chamber Assembly Type | Bolted |
| Media Intake Port Configuration | Center Horizontal, Side, Center Vertical |
| Manifold Port Connection Type | Single Port |
| Center Section Material | Polypropylene |
| Manifold Connection Standard | NPT |
| Material Conductivity | Non-Conductive |
| Media Discharge Port Configuration | Side, Center Vertical |
| Diaphragm Reinforcement | Not Reinforced |
| Surface Roughness | Not Applicable |
| Includes Clean In Place Technology | No Clean In Place Included |
| Viscosity (Maximum) | Not Applicable |
| Diaphragm Base Material | Santoprene |
| Displacement Per Stroke | 0.01 gal |
| Includes Solenoid | No Solenoid Included |
| Food Compatibility | Not Applicable |
| Wire Rope Length | 5-1/2 in |
| Length | 5-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |