Double Diaphragm Pump, Air Consumption (Maximum) Not Applicable, Air Intake Connection Size 1 1/2 in, Air Intake Connection Type NPT, Check Seat Material PTFE, Diaphragm Material PTFE, Feet of Head (Maximum) 289 ft, Flow Rate (Maximum) 106 gpm, Manifold Connection Single Port, Media Discharge Connection Size 1 1/2 in, Media Discharge Connection Type NPT, Media Discharge Location Top, Media Intake Connection Size 1 1/2 in, Media Intake Connection Type NPT, Media Intake Location Bottom
| Item | Double Diaphragm Pump |
|---|---|
| Housing Material - Pumps | Cast-Iron |
| Pump Assembly Type | Bolt |
| Manifold Connection | Single Port |
| Valve Material | PTFE |
| Valve Type | Ball |
| Air Consumption (Maximum) | Not Applicable |
| Air Intake Connection Size | 1-1/2 in |
| Air Intake Connection Type | NPT |
| Check Seat Material | PTFE |
| Diaphragm Material | PTFE |
| Media Temperature (Maximum) | 220 deg F |
| Media Temperature (Minimum) | -35 deg F |
| Operating Pressure (Maximum) | 125 psi |
| Self-Priming Wet | 11 ft |
| Pump Operation Type | Air |
| Agency Compliance | ATEX, CE, EAC |
| Manufacturers Warranty Length | 5 yr |
| Includes | Not Applicable |
| Self-Priming Dry | 11 ft |
| For Use With | Intermittent/On-Demand, Moderately Abrasive Fluids, and Suspended Solids |
| Standards | ABS Type Approved, CE Marked, EAC Certified, ISO |
| Inlet/Outlet | 1-1/2 in |
| Overall Width | 11.2 in |
| Overall Height | 24.8 in |
| Overall Length | 12.4 in |
| Flow Rate @ 10 psi | Not Applicable |
| Feet of Head (Maximum) | 289 ft |
| Air Intake Pressure (Maximum) | 125 psi |
| Flow Rate @ 60 psi | 94 gpm |
| Manifold Connection Type | NPT |
| Flow Rate @ 20 psi | 53.5 gpm |
| Flow Rate @ 30 psi | Not Applicable |
| Flow Rate @ 90 psi | Not Applicable |
| Flow Rate @ 40 psi | 74.3 gpm |
| Media Intake Location | Bottom |
| Media Intake Connection Size | 1-1/2 in |
| Chemical Compatibility | Antifreeze, Kerosene, Oil, Water |
| Flow Rate @ 120 psi | Not Applicable |
| Solid Diameter (Maximum) | 1/4 in |
| Series Family | S15 |
| Media Discharge Connection Type | NPT |
| Priming | Self-Priming |
| Media Intake Connection Type | NPT |
| Flow Rate @ 80 psi | 98 gpm |
| Media Discharge Connection Size | 1-1/2 in |
| Flow Rate @ 15 psi | Not Applicable |
| Media Discharge Location | Top |
| Flow Rate @ 50 psi | Not Applicable |
| Flow Rate (Maximum) | 106 gpm |
| Flow Rate @ 70 psi | Not Applicable |
| For Use With Potable Systems | No |
| Wetted Housing Material | Cast Iron |
| Flow Rate @ 100 psi | 106 gpm |
| Phase | Not Applicable |
| Displacement Per Stroke | 0.41 gal |
| Material Conductivity | Non-Conductive |
| Diaphragm Reinforcement | Not Reinforced |
| Diaphragm Base Material | PTFE |
| Diaphragm Backing Material | Santoprene |
| Wetted Body Material | Cast Iron |
| Includes Solenoid | No Solenoid Included |
| Viscosity (Maximum) | Not Applicable |
| Manifold Connection Standard | NPT |
| Manifold Port Connection Type | Single Port |
| Surface Roughness | Not Applicable |
| Media Discharge Port Configuration | Center Horizontal |
| Center Section Material | Aluminum |
| Solenoid Voltage | Not Applicable |
| Includes Clean In Place Technology | No Clean In Place Included |
| Food Compatibility | Not Applicable |
| Series | S15 |
| Fluid Chamber Assembly Type | Bolted |
| Mounting Hardware Material | Steel |
| Media Intake Port Configuration | Center Horizontal |
| Wire Rope Length | 12.4 in |
| Length | 12.4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |