Cam Follower, Closure Double Sealed, Drive Type Slotted, Duty Type Standard, Face Design Screwdriver Slot, Overall Length 3 9/32 in, Roller Diameter 2 1/4 in, Roller Head Type Flat, Roller Material Alloy Steel, Roller Width 1 1/4 in, Rolling Element Rows 1, Seal Type Contact, Stud Material Carbon Steel, Stud Thread Size 7/8 In.-14, Stud Type Concentric, System of Measurement Inch, Bearing Material Alloy Steel, Bearing Material Grade AISI 52100, Bearing Type Needle Roller, Drive Location Stud
| Item | Cam Follower |
|---|---|
| Roller Style | Stud |
| Roller Type | Screwdriver Slot Head |
| Face Design | Screwdriver Slot |
| Closure | Double Sealed |
| Bearing Material | Alloy Steel |
| Roller Diameter | 2-1/4 in |
| Roller Width | 1-1/4 in |
| Rolling Element Rows | 1 |
| Roller Material | Alloy Steel |
| Stud Length | 2 in |
| Stud Type | Concentric |
| Stud Diameter | 7/8 in |
| Bearing Type | Needle Roller |
| Stud Material | Alloy Steel |
| Agency Compliance | ABMA |
| Dynamic Load Capacity (Lb.) | 10,370 |
| Number of Bearings | 1 |
| Static Load Capacity (Lb.) | 10,700 |
| Seal Type | Contact |
| Overall Length | 3-9/32 in |
| Standards | ABMA |
| Duty Type | Standard |
| Flange Thickness | Not Applicable |
| System of Measurement | Inch |
| Stud Thread Length | 1 in |
| Minimum Temperature | -30 deg F |
| Stud Thread Size | 7/8"-14 |
| Roller Material Grade | AISI 52100 |
| Static Radial Load Capacity | 10,700 lbf |
| Load Direction | Radial |
| Seal Material | Molded Acetyl |
| Lubrication Openings | Oiler Hole |
| Bearing Material Grade | AISI 52100 |
| Features | Screwdriver Slot Stud Type Needle Roller Bearings are Recommended Where Running Loads and Shock Loads are Moderate. Bearing Capacity of the Stud Type Series is Limited by the Moderately Sized Stud. |
| Drive Type | Slotted |
| Dynamic Radial Load Capacity | 10,370 lbf |
| Roller Head Type | Flat |
| Maximum Temperature | 250 Degrees F |
| Flange Diameter | Not Applicable |
| Drive Location | Stud |
| Bore Diameter | 7/8 in |
| Wire Rope Length | 3-9/32 in |
| Number of Rows | 1 |
| Lube Port Location | Stud Side, Roller Head |
| Length | 3-9/32 in |
| Series | CR |
| Bearing Lubrication | Relubricateable |
| Fits Chest Size | Screwdriver Slot Stud Type Needle Roller Bearings are Recommended Where Running Loads and Shock Loads are Moderate. Bearing Capacity of the Stud Type Series is Limited by the Moderately Sized Stud. |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |