Cam Follower, Closure Open, Drive Type Slotted, Duty Type Heavy, Face Design Screwdriver Slot, Overall Length 1 13/32 in, Roller Diameter 7/8 in, Roller Head Type Flat, Roller Material Alloy Steel, Roller Width 1/2 in, Rolling Element Rows 1, Seal Type Not Applicable, Stud Material Carbon Steel, Stud Thread Size 7/16 In.-20, Stud Type Concentric, System of Measurement Inch, Bearing Material Alloy Steel, Bearing Material Grade AISI 52100, Bearing Type Needle Roller, Drive Location Stud
| Item | Cam Follower |
|---|---|
| Roller Style | Stud |
| Roller Type | Screwdriver Slot Head |
| Face Design | Screwdriver Slot |
| Closure | Open |
| Bearing Material | Alloy Steel |
| Roller Diameter | 7/8 in |
| Roller Width | 1/2 in |
| Rolling Element Rows | 1 |
| Stud Length | 7/8 in |
| Roller Material | Alloy Steel |
| Stud Type | Concentric |
| Stud Diameter | 7/16 in |
| Bearing Type | Needle Roller |
| Static Load Capacity (Lb.) | 41,500 |
| Dynamic Load Capacity (Lb.) | 2,140 |
| Agency Compliance | ABMA |
| Stud Material | Alloy Steel |
| Number of Bearings | 1 |
| Roller Material Grade | AISI 52100 |
| Stud Thread Size | 7/16"-20 |
| Dynamic Radial Load Capacity | 2,140 lbf |
| Overall Length | 1-13/32 in |
| Drive Location | Stud |
| Roller Head Type | Flat |
| System of Measurement | Inch |
| Flange Diameter | Not Applicable |
| Static Radial Load Capacity | 41,500 lbf |
| Load Direction | Radial |
| Duty Type | Heavy |
| Stud Thread Length | 3/8 in |
| Seal Type | Not Applicable |
| Maximum Temperature | 250 Degrees F |
| Lubrication Openings | Oiler Hole |
| Bearing Material Grade | AISI 52100 |
| Minimum Temperature | -30 deg F |
| Drive Type | Slotted |
| Flange Thickness | Not Applicable |
| Standards | ABMA |
| Bore Diameter | 7/16 in |
| Wire Rope Length | 1-13/32 in |
| Number of Rows | 1 |
| Lube Port Location | Stud Side, Roller Head |
| Length | 1-13/32 in |
| Bearing Lubrication | Relubricateable |
| Series | Smith Bearing |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |