Electric Drum Pump, Max. Head Pressure 11 psi, Max. Oil Flow 7 gpm, Max. Outlet Pressure 11 psi, For Use With SP-ENC-V/SP-8850-39, Rated Voltage 120 V AC, Plug Type NEMA 5-15P, Suction Tube OD 1 5/8 in, Suction Tube Length 39 in, Cord Length 16 ft, Includes Bung Adapter No, Runs Dry Yes, Thermal Protection Yes, Frequency (Hz) 50/60 Hz, Power Source Corded Electric, Variable Speed Yes, Includes Discharge Hose No, Self-Priming Yes
| For Use With | SP-ENC-V/SP-8850-39 |
|---|---|
| Item | Electric Drum Pump |
| Max. Viscosity | 1,000 cps |
| Motor Type | Electric AC Brush |
| Power Source | Corded Electric |
| Outlet Size | 1-1/2 in |
| Wetted Materials | 316 Stainless Steel, PTFE |
| Voltage | 120V AC |
| Motor Enclosure | TEFC |
| Metered | No |
| Motor RPM | 0-10,000 |
| Inlet Size | 1-1/2 in |
| Max. Pressure | 10 psi |
| Width | 10 in |
| Suction Tube Length | 39 in |
| Full Load Amps | 8.5 A |
| Manufacturers Warranty Length | 1 yr |
| GPM | 3.1 |
| Suction Tube Outlet O.D. Size | 1-29/32 in |
| Agency Compliance | Compliant, FDA, ETL, 3A |
| DEF Compatible | No |
| Suction Tube Material | Stainless Steel |
| Housing Material | 316 Stainless Steel |
| Adapter Material | Stainless Steel |
| Suction Tube Outlet I.D. Size | 1-1/2 in |
| HP | 1-7/64 |
| Length | 52 in |
| Thermal Protection | Yes |
| Hz | 60 Hz |
| Self-Priming | Yes |
| Suction Tube Type | Centrifugal |
| Phase | Single |
| Height | 55 in |
| Max. Liquid Temp. | 175 deg F |
| Duty | Intermittent |
| Clamp Style | Tri-Clamp |
| Max. Head | 23 ft |
| Max. GPM for Water | 35 |
| Features | Hygienic Design, Quick Tear Down |
| Frequency (Hz) | 50/60 Hz |
| Max. Fluid Temp. | 175 deg F |
| Plug Type | NEMA 5-15P |
| Max. Head Pressure | 11 psi |
| Includes Nozzle | No |
| Includes Discharge Hose | No |
| For Container Type | Drum |
| Variable Speed | Yes |
| Includes Bung Adapter | No |
| Seal Material | Sealless |
| Food Grade | Yes |
| Max. Flow Rate | 31 gpm |
| Suction Tube OD | 1-5/8 in |
| Includes Suction Tube | Yes |
| Overall Length | 52 in |
| Diesel Exhaust Fluid Compatible | No |
| Max. Head - Pumps | 25 ft |
| For Media Type | Acetic Acid, Ammonia, Ammonium Hydroxide, Antifreeze, Calcium Chloride, Citric Acid, Ethylene Glycol, Glycerin, Hydraulic Oil, Methyl Chloride, Motor Oil, Nitric Acid, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Trichlorethylene, Water |
| Suction Tube ID | 1-5/16 in |
| Compatible Chemicals | Acetic Acid 20%, Acetic Acid 80%, Ammonia (Liquids), Ammonium Hydroxide, Antifreeze (Coolant), Calcium Chloride, Citric Acid 50%, Deionized Water, Ethylene Glycol, Fresh Water, Glycerin, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Methyl Chloride, Motor Oil, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Trichlorethylene (50%) |
| Duty Cycle | Intermittent |
| Not Recommended Chemicals | Acetone, Bleach, Chromic Acid 30%, Chromic Acid 50%, Cyclohexane, DEF, Diesel Fuel, Ethanol, Ethyl Acetate, Formaldehyde, Formaldehyde 40%, Formic Acid, Gasoline, Glacial Acetic Acid, Heptane, Hexane, Hydrochloric Acid 100%, Hydrochloric Acid 20%, Hydrochloric Acid 37%, Hydrofluoric Acid 100%, Hydrofluoric Acid 20%, Hydrofluoric Acid 75%, Isopropanol, Kerosene, Lacquer Thinners, Methanol, Methyl Ethyl Ketone, Stoddard Solvent, Sulfuric Acid 10% to 75%, Sulfuric Acid 75% to 100%, Toluene, Xylene |
| Runs Dry | Yes |
| Number of Phases | 1 |
| Motor HP | 1.1 |
| Housing Material - Pumps | 316 Stainless Steel |
| For Container Size | 55 gal |
| Discharge Tube Outlet ID | 1 in |
| Discharge Connection Type | Tri-Clamp |
| Noise Level | 88 dB |
| Cord Length | 16 ft |
| Discharge Tube Outlet OD | 1-1/2 in |
| Max. Oil Flow | 7 gpm |
| Max. Outlet Pressure | 11 psi |
| Gear Lube | NT |
| Grease | NT |
| Rated Voltage | 120 V AC |
| Maximum Outlet Pressure | 11 psi |
| Frequency | 50/60 Hz |
| Maximum Flow Rate | 31 gpm |
| Wetted Material | PTFE, 316 Stainless Steel, Buna N |
| Full Load Current | 8.5 A |
| Maximum Viscosity | 1,000 cps |
| Motor Horsepower | 1.1 HP |
| Maximum Head | 25 ft |
| Standards | 3A, ETL, FDA |
| Maximum Head Pressure | 11 psi |
| Maximum Oil Flow | 7 gpm |
| Maximum Fluid Temperature | 175 deg F |
| Chemical Compatibility | Acetic Acid 20%, Acetic Acid 80%, Ammonia Liquid, Ammonium Hydroxide, Antifreeze Coolant, Calcium Chloride, Citric Acid 50%, Concentrated Nitric Acid, Deionized Water, Ethylene Glycol, Fresh Water, Glycerin, Petroleum Oil, Synthetic Oil, Methyl Chloride, Motor Oil, Nitric Acid 10% Solution, Nitric Acid 20% Solution, Nitric Acid 50% Solution, Phosphoric Acid 40% Solution, Potassium Hydroxide 50%, Salt Water, Sodium Bicarbonate 10%, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Trichlorethylene 50% |
| Meter Type Included | No Meter Included |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Power Source - TS Only | Corded Electric |
| Wire Rope Length | 52 in |
| Power Source - old | Corded Electric |
| Fits Chest Size | Hygienic Design, Quick Tear Down |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |