Hydronic Circulating Pump, Compatible Intake Pipe Size 3/4 in, 1 in, 1 1/4 in, 1 1/2 in, Connection Type Flange, Face to Face Dimension 6 3/8 in, Flange or Union Included No, For Use With Potable Systems No, Horsepower 1/25 hp, Maximum Feet of Head 10 ft, Maximum Flow Rate @ 10 Feet of Head 0 gpm, Maximum Flow Rate @ 1 Foot of Head 15 gpm, Nameplate Voltage 120V AC, Number of Speeds Variable, Phase Single, Pump Type Energy Efficient, Series Family 00, Maximum Flow Rate @ 5 Feet of Head 13 gpm
| Item | Hydronic Circulating Pump |
|---|---|
| Voltage | 115V AC |
| Phase | Single |
| Horsepower | 1/25 hp |
| Inlet/Outlet Size | 3/4 in to 1-1/2 in |
| Series | 007E |
| Pump Type | Energy Efficient |
| Number of Speeds | Variable |
| Max. GPM @ Head | 15 gpm @ 1 ft |
| Maximum Feet of Head | 10 ft |
| Min. GPM @ Head | 0 gpm @ 10 ft |
| Connection Type | Flange |
| Standards | FCC, UL-CUS |
| Shaft Material | Ceramic |
| Impeller Material | Composite |
| Compliance | UL |
| Thermal Protection | Yes |
| Best Efficiency GPM @ Head | 8 gpm @ 10 ft |
| Amps | 0.54 A |
| Drive Type | Magnetic |
| Loop Configuration | Closed |
| Mechanical Seal | No |
| Face to Face Dimension | 6-3/8 in |
| Pump Mount | In Line |
| Shut-Off | 10 ft |
| Features | 4-Bolt Flange, High Efficiency |
| Body Gasket Material | EPDM |
| For Use With Potable Systems | No |
| Nameplate Voltage | 120V AC |
| Manufacturer Warranty Length | 3 yr |
| Overall Width | 5.13 in |
| Minimum Media Temperature | 36 deg F |
| Maximum RPM | 4,830 rpm |
| Overall Length | 6 in |
| Series Family | 00 |
| Maximum Flow Rate @ 50 Feet of Head | 13 gpm |
| Maximum Operating Pressure | 125 psi |
| Maximum Flow Rate @ 15 Feet of Head | 0 gpm |
| Frequency | 60 Hz |
| Compatible Intake Pipe Size | 3/4 in, 1 in, 1-1/4 in, 1-1/2 in |
| Pump Housing Material | Cast Iron |
| Overall Height | 6.38 in |
| Compatible Discharge Pipe Size | 3/4 in, 1 in, 1-1/4 in, 1-1/2 in |
| Maximum Media Temperature | 230 deg F |
| Maximum Flow Rate @ 5 Feet of Head | 13 gpm |
| Flange or Union Included | No |
| Rotor Type | Wet |
| Maximum Flow Rate @ 10 Feet of Head | 0 gpm |
| Maximum Flow Rate @ 1 Feet of Head | 15 gpm |
| Includes Flange | No Flange Included |
| Includes Volute | Volute Included |
| Operating Pressure - Maximum | 125 psi |
| For Discharge Pipe Diameter | 3/4 in, 1 in, 1-1/4 in, 1-1/2 in |
| Connection Standard | Flange |
| Pump Casing Material | Cast Iron |
| Revolutions Per Minute - Maximum | 4,830 rpm |
| Includes Union | Not Applicable |
| Flow Rate - Maximum | 16 gpm |
| Media Temperature - Maximum | 230 deg F |
| For Inlet Pipe Diameter | 3/4 in, 1 in, 1-1/4 in, 1-1/2 in |
| Feet of Head - Maximum | 10 ft |
| For Low Lead Compliance Level | EX |
| Full Load Current | 0.54 A |
| Motor Enclosure Design | Totally Enclosed Non-Ventilated |
| Media Temperature - Minimum | 36 deg F |
| Wire Rope Length | 6 in |
| Length | 6 in |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 1 |