Linear Ball Bearing, System of Measurement Metric, Inside Diameter 25 mm, Outside Diameter 40 mm, Self-Alignment Self-Aligning, Overall Length 58 mm, Dynamic Load Capacity 1,507 lbf, Material Delrin, Series Super Smart, Steady State Speed 3 mm/sec, Maximum Operating Temperature 185 Degrees F, Minimum Operating Temperature 0 Degrees F, Ball Bearing Type Open, Inside Diameter Tolerance + 0.013 mm, Accelerated Speed 150 mm/sec, Slot Width 12.5 mm, Retention Hole Diameter 3 mm
| Item | Linear Ball Bearing |
|---|---|
| Type | Open |
| Bore Dia. | 25 mm |
| Outside Dia. | 40 mm |
| Material | Delrin |
| Slot Angle (Degrees) | 60 |
| Steady State Speed | 3 mm/sec |
| Retention Hole Location | 1.50mm under the Center Line |
| Self-Alignment | Self-Aligning |
| Slot Width (mm) | 12.5 |
| Retention Hole Dia. (mm) | 3 |
| For Use With | Thomson Shafting |
| Temp. Range (F) | 0 Degrees to 185 Degrees F |
| Dimension T | 25 |
| Dimension G | 1.50 mm Below Center Line |
| Dynamic Load Capacity (N) | 6,700 |
| Dimension C1 | 43.7 mm |
| Accelerated Speed | 150 mm/sec |
| Between Grooves (mm) | 43.7 |
| Length (In.) | 2.2835 |
| Length (mm) | 58 |
| Load Capacity | 6,700 |
| Dimension C | 58 in |
| Required Housing Bore Dia. (mm) | 40 |
| Slot Width (In.) | 0.4921 |
| Dimension F | 3 mm |
| Inside Dia. Tolerance | + .013 |
| System of Measurement | Metric |
| Minimum Operating Temperature | 0 deg F |
| Maximum Operating Temperature | 185 deg F |
| Series | Super Smart |
| Inside Dia. | 25 mm |
| Outside Diameter | 40 mm |
| Dynamic Load Capacity | 1,507 lbf |
| Overall Length | 58 mm |
| Inside Diameter | 25 mm |
| Inside Diameter Tolerance | + 0.013 mm |
| Retention Hole Diameter | 3 mm |
| Slot Width | 12.5 mm |
| Ball Bearing Type | Open |
| Wire Rope Length | 58 mm |
| Length | 58 mm |
| Shell Material | Delrin |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |