Pillow Block Bearing, Base Height 0.708 in, Base Width 2.047 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 1/2 in, Bore Type Cylindrical, Center Height 1 59/64 in, Closure Double Sealed, Expansion Type Fixed, Housing Material Cast Iron, Included Bearing HC208-24, Lubricant Material NLGI #2 Equivalent, Maximum Speed 5,000 RPM Grease, Maximum Temperature 248 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 5 1/2 in
| System of Measurement | Inch |
|---|---|
| Item | Pillow Block Bearing |
| Shaft Locking Type | Collar |
| Housing Material | Cast Iron |
| Bearing Material | 52100 Chrome Steel |
| Bearing Insert Type | Ball |
| Bearing Insert Material | Alloy Steel |
| Bore Diameter | 1-1/2 in |
| Series | HCPK |
| Closure | Double Sealed |
| Center Height | 1-59/64 in |
| Mount Hole Center-to-Center Length | 140 mm |
| Overall Length | 7.126 in |
| Overall Width | 56.3 mm |
| Overall Height | 3.937 in |
| Standards | AFBMA, ISO |
| Bearing Lubrication | Relubricateable |
| Temp. Range | -4 to +248° F |
| Dimension E | 1-3/4 in |
| Finish | Painted |
| Bore Type | Cylindrical |
| Mounting Bolt Size | 1/2 in |
| Minimum Temperature | -40 deg F |
| Base Height | 0.708 in |
| Mount Hole Center-to-Center Width | 5-1/2 in |
| Lubricant Material | NLGI #2 Equivalent |
| Bearing Material Grade | AISI 52100 |
| Base Width | 2.047 in |
| Mount Type | Bolt-Through |
| Seal Material | Synthetic Rubber |
| Expansion Type | Fixed |
| Dynamic Radial Load Capacity | 6,631 lbf |
| Maximum Temperature | 248 deg F |
| Static Radial Load Capacity | 4,069 lbf |
| Lubrication Openings | Grease Fitting |
| Seal Type | Contact |
| Features | Anti-Rotation Device, Dual Heavy-Duty Slinger Type Contact Seals, Grease Fitting for Adding Lubricant, Low Center Height, Low Shaft Height, One-Piece Cast Iron Housing, Solid Base, Triple Lip Seals Available on Request, Wide Inner Ring Bearing |
| Number of Mount Holes | 2 |
| Resistance Properties | Corrosion-Resistant, Rust-Resistant, Wear-Resistant |
| Wire Rope Length | 7.126 in |
| Maximum Speed | 5,000 rpm |
| Included Bearing | HC208-24 |
| Inner Ring Width | 56.3 mm |
| Split Housing | Not Split |
| Length | 7.126 in |
| Fits Chest Size | Anti-Rotation Device, Dual Heavy-Duty Slinger Type Contact Seals, Grease Fitting for Adding Lubricant, Low Center Height, Low Shaft Height, One-Piece Cast Iron Housing, Solid Base, Triple Lip Seals Available on Request, Wide Inner Ring Bearing |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |