Pillow Block Bearing, Base Height 0.905 in, Base Width 2.362 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 2 in, Bore Type Cylindrical, Center Height 2 15/64 in, Closure Double Sealed, Expansion Type Fixed, Housing Material Cast Iron, Included Bearing HC211-32, Lubricant Material NLGI #2 Equivalent, Maximum Speed 5,000 RPM Grease, Maximum Temperature 248 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 6 23/32 in
| System of Measurement | Inch |
|---|---|
| Item | Pillow Block Bearing |
| Shaft Locking Type | Collar |
| Housing Material | Cast Iron |
| Bearing Material | 52100 Chrome Steel |
| Bearing Insert Type | Ball |
| Bearing Insert Material | Steel |
| Bore Diameter | 2 in |
| Series | HCP |
| Closure | Double Sealed |
| Center Height | 2-15/64 in |
| Mount Hole Center-to-Center Length | 171 mm |
| Overall Length | 8.622 in |
| Overall Width | 71.4 mm |
| Overall Height | 4.921 in |
| Temp. Range | -4 to +248° F |
| Bearing Lubrication | Relubricateable |
| Standards | AFBMA, ISO |
| Finish | Painted |
| Lubrication Openings | Grease Fitting |
| Mounting Bolt Size | 5/8 in |
| Minimum Temperature | -40 deg F |
| Mount Hole Center-to-Center Width | 6-23/32 in |
| Seal Material | Synthetic Rubber |
| Bore Diameter Tolerance | +/-0.0009 in |
| Resistance Properties | Corrosion-Resistant, Rust-Resistant, Wear-Resistant |
| Base Width | 2.362 in |
| Maximum Temperature | 248 deg F |
| Number of Mount Holes | 2 |
| Dynamic Radial Load Capacity | 9,779 lbf |
| Base Height | 0.905 in |
| Static Radial Load Capacity | 6,564 lbf |
| Lubricant Material | NLGI #2 Equivalent |
| Expansion Type | Fixed |
| Bearing Material Grade | AISI 52100 |
| Bore Type | Cylindrical |
| Features | Anti-Rotation Device, Dual Heavy-Duty Slinger Type Contact Seals, Grease Fitting for Adding Lubricant, One-Piece Cast Iron Housing, Solid Base, Triple Lip Seals Available on Request, Wide Inner Ring Bearing |
| Mount Type | Bolt-Through |
| Seal Type | Contact |
| Wire Rope Length | 8.622 in |
| Included Bearing | HC211-32 |
| Maximum Speed | 5,000 rpm |
| Inner Ring Width | 71.4 mm |
| Split Housing | Not Split |
| Length | 8.622 in |
| Fits Chest Size | Anti-Rotation Device, Dual Heavy-Duty Slinger Type Contact Seals, Grease Fitting for Adding Lubricant, One-Piece Cast Iron Housing, Solid Base, Triple Lip Seals Available on Request, Wide Inner Ring Bearing |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |