Attachment Link, Attachment Number D-1, Attachment Type Pin, Material Steel, Chain Overall Width 1.398 in, Chain Number 80, Roller Diameter 5/8 in, Finish Plain, Pitch 1 in, Link Type Attachment, Centerline to Attachment End 0.758 in, Centerline to Hole Center 0.64 in, Extended Pin Diameter 0.312 in, Lubrication SAE 10 to SAE 50, Maximum Operating Temperature 300 Degrees F, Minimum Operating Temperature 15 Degrees F, Number of Tab Holes 1, Pin Contruction Cottered Pin, Plate Height 0.949 in
| Roller Chain Link Item | Attachment Link |
|---|---|
| Roller Chain Link Type | D-1 |
| Industry Chain Size | 80 |
| Chain Link Material | Carbon Steel |
| Industry Chain Pitch | 1 in |
| Number of Strands | Single |
| Chain Link Overall Width | 1.398 in |
| Chain Roller Dia. | 5/8 in |
| Roller Link Plate Height | 0.949 in |
| Type | D-1 Attachment |
| Pin Link Plate Thickness | 1/8 in |
| Material | Steel |
| Width Between Roller Link Plates | 5/8 in |
| Pin Link Plate Thickness (In.) | 1/8 |
| Tensile Strength | 15,400 lb/in |
| Overall Width (In.) | 1.398 |
| Item | Attachment Link |
| Inside Pin Dia. | 0.312 in |
| Max. Allowable Load (Lb.) | 2,400 |
| Temp. Range | 15 Degrees to 300 Degrees F |
| Pin Length | 1.398 in |
| Connecting End to Center Line (In.) | 0.758 |
| Outside Pin Dia. (In.) | 0.312 |
| Roller Link Plate Height (In.) | 0.949 |
| Rivet End to Center Line | 0.64 in |
| Tensile Strength (Lb.) | 15,400 |
| Pin Length (In.) | 1.398 |
| Connecting End to Center Line | 0.758 in |
| Outside Pin Dia. | 0.312 in |
| Agency Compliance | American National Standards Institute |
| Roller Dia. (In.) | 5/8 |
| Max. Allowable Load | 2,400 lb |
| Pitch | 1 in |
| Rivet End to Center Line (In.) | 0.64 |
| Width Between Roller Link Plates (In.) | 5/8 |
| Length (In.) | 1 |
| Lubrication | SAE 10 to SAE 50 |
| Pin Type | Cottered |
| ANSI Chain Size | 80 |
| Finish | Plain |
| Centerline to Hole Center | 0.64 in |
| Chain Number | 80 |
| Minimum Operating Temperature | 15 deg F |
| Chain Overall Width | 1.398 in |
| Centerline to Attachment End | 0.758 in |
| Number of Tab Holes | 1 |
| Attachment Type | Pin |
| Pin Contruction | Cottered Pin |
| Roller Diameter | 5/8 in |
| Plate Height | 0.949 in |
| Extended Pin Diameter | 0.312 in |
| Maximum Operating Temperature | 300 deg F |
| Attachment Number | D-1 |
| Standards | ANSI |
| Plate Thickness | 5/8 in |
| Link Type | Attachment |
| Shell Material | Steel |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |