Engranaje de Cadena de Una Hilera, Diámetro de Barreno 5/8 in, Para Paso de Cadena 5/8 in, Para Número de Hileras Una, Tipo de Maza Un Lado, Material Acero, Diámetro Máximo de Barreno 5/8 in, Número de Dientes 11, Diámetro Exterior 2.5 in, Diámetro de Paso 2.219 in, Tipo de Barreno Fijo, Número de Cadena 50, Acabado Óxido Negro, Para Tipo de Paso Paso Sencillo, Diámetro de Maza 1 3/4 in, Proyección de Maza 0.657 in, Incluye Tornillos de Fijación, Cuñero Sí, Profundidad de Cuñero 3/32 in, Ancho de Cuñero 3/16 in, Longitud a Través del Barreno 1 in, Grado de Material 1045
| Item | Single Strand Sprocket |
|---|---|
| Material | Steel |
| Number of Teeth - Sprockets | 11 |
| Number of Teeth | 11 |
| Number of Chain Rows | Single |
| Includes | Set Screws |
| Outside Dia. | 3 in |
| Chain Number | 50 |
| Bore Dia. - Sprockets | 5/8 in |
| Set Screw Size | 1/4 in |
| Industry Chain Size | 50 |
| Hub Dia. | 1.75 in |
| Length through Bore | 1 in |
| ANSI Sprocket Number | 50 |
| Sprocket Bore Type | Fixed Bore |
| Hub Dia. (In.) | 1-3/4 |
| Bushing Required | None |
| Setscrew Location | Directly Over Keyway and 90 Degrees from Keyway |
| Bore Dia. (In.) | 5/8 |
| Pitch Dia. (In.) | 2.219 |
| Length through Bore (In.) | 1 |
| Pitch Dia. | 2.219 in |
| Set Screw Dia. (In.) | 1/4 |
| Outside Dia. (In.) | 2-1/2 |
| Type | Finished Bore |
| Item - Roller Chain Sprockets | Roller Chain Sprocket |
| Material - Sprockets | Steel |
| Sprocket Hub Type | Type B |
| Bore Type | Fixed |
| Industry Chain Pitch | 5/8 in |
| Set Screw Hole Dia. | 1/4 in |
| Resistance Properties | Corrosion Resistant |
| For Pitch Type | Single Pitch |
| Maximum Bore Diameter | 5/8 in |
| Hub Diameter | 1-3/4 in |
| Finish | Black Oxide |
| Hub Type | One Side |
| Standards | ANSI |
| For Number of Strands | Single |
| Hub Projection | 0.657 in |
| Width Across Tooth Sets | Not Applicable |
| Number of Set Screws | 2 |
| For Chain Pitch | 5/8 in |
| Pitch Diameter | 2.219 in |
| Set Screw Location | 90 Degrees from Keyway, Directly Over Keyway |
| Teeth Heat Treatment | Hardened Teeth |
| Tooth Width | 0.343 in |
| Keyway Depth | 3/32 in |
| Outside Diameter | 2-1/2 in |
| Bore Diameter | 5/8 in |
| Keyway Width | 3/16 in |
| Material Grade | 1045 |
| Shell Material | Steel |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |