Engine Driven Pump, Engine Size 242 cc, HP 8 hp, Tank Capacity 1.59 gal, Ignition Type Recoil-Start, Pump Mechanism Centrifugal, Body Material Cast Iron, Volute Material Cast Iron, Seal Material Silicon, Frame Material Steel, Flow Rate @ 10 Ft. of Head 432 gpm, Flow Rate @ 20 Ft. of Head 387 gpm, Flow Rate @ 40 Ft. of Head 280 gpm, Flow Rate @ 60 Ft. of Head 175 gpm, Flow Rate @ 80 Ft. of Head 75 gpm, Max. Head 95 ft, Max. Suction Lift 26 ft, Maximum Self-Priming Lift 20 ft
| Tank Capacity | 1.59 gal |
|---|---|
| GPM of Water @ 50 Ft. of Head | 225 |
| GPM of Water @ 20 Ft. of Head | 387 |
| Impeller Material | Cast Iron |
| GPM of Water @ 90 Ft. of Head | 45 |
| Roll Bar Frame | Steel |
| GPM of Water @ 40 Ft. of Head | 280 |
| Material of Construction | Aluminum, Cast Iron |
| Length | 25 in |
| Height | 23-1/2 in |
| Engine Size | 242 cc |
| GPM of Water @ 100 Ft. of Head | 25 |
| Mechanical Seal | Silicon Carbide |
| Self-Priming | Yes |
| GPM of Water @ 60 Ft. of Head | 175 |
| Application | Dewatering |
| Solids Handling Capacity | 3/8 in |
| Max. Head | 95 ft |
| Sensor Type | Low Oil |
| GPM of Water @ 10 Ft. of Head | 432 |
| Max. Pressure | 41 psi |
| Temp. Range | 33 to 104 deg F |
| Impeller Type | Open |
| Ignition Type | Recoil-Start |
| HP | 8 hp |
| GPM of Water @ 80 Ft. of Head | 75 |
| Item | Engine Driven Pump |
| Width | 18 in |
| Engine Brand | Honda |
| Agency Compliance | EPA, CARB |
| Inlet | 4 in MNPT |
| Volute/Wear Plate | Cast Iron |
| Max. Suction Lift | 26 ft |
| Includes | Impeller Wrench |
| Casing Adapter | Aluminum |
| Check Valve | Buna-N |
| Engine RPM | 3,600 |
| GPM of Water @ 30 Ft. of Head | 342 |
| Engine/Motor Type | Gas |
| GPM of Water @ 70 Ft. of Head | 125 |
| Outlet | 4" NPT |
| Flow Rate @ 80 Ft. of Head | 75 gpm |
| Frame Material | Steel |
| Overall Length | 25 in |
| Inlet Standard | NPT |
| Flow Rate @ 60 Ft. of Head | 175 gpm |
| Overall Width | 18 in |
| Max. Diameter Solids | 3/8 in |
| Impeller Design | Semi-Open |
| Power Source | Gas Engine |
| Max. Liquid Temp. | 104 deg F |
| Inlet Dia. | 4 in |
| Body Material | Cast Iron |
| Flow Rate @ 10 Ft. of Head | 432 gpm |
| RPM | 3,600 |
| Pump Mechanism | Centrifugal |
| Discharge Gender | Male |
| Inlet Gender | Male |
| Frame Design | Roll Cage |
| Discharge | 4 in MNPT |
| Maximum Self-Priming Lift | 20 ft |
| Discharge Dia. | 4 in |
| Overall Height | 23-1/2 in |
| Flow Rate @ 40 Ft. of Head | 280 gpm |
| Discharge Standard | NPT |
| Maximum Discharge Pressure | 41 psi |
| Flow Rate @ 20 Ft. of Head | 387 gpm |
| Volute Material | Cast Iron |
| Frame Design - Pumps | Full Tubular Frame |
| Standards | EPA/CARB |
| Seal Material | Silicon |
| Inlet Diameter | 4 in |
| Self-Priming Lift - Maximum | 20 ft |
| Series | TE |
| Suction Lift - Maximum | 26 ft |
| Engine Series | GX240 |
| Feet of Head - Maximum | 95 ft |
| Discharge Pressure - Maximum | 41 psi |
| Manufacturers Warranty Length | 2 yr |
| Rotation Speed - Maximum | 3,600 rpm |
| Horsepower | 8 |
| Solids Diameter - Maximum | 3/8 in |
| Liquid Temperature - Maximum | 104 deg F |
| Flow Rate @ 20 ft of Head | 387 gpm |
| Discharge Diameter | 4 in |
| Flow Rate @ 10 ft of Head | 432 gpm |
| For Media Type | Clear Water |
| Power Source - TS Only | Gas Engine |
| Wire Rope Length | 25 in |
| Power Source - old | Gas Engine |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |