Diamond Turning Insert, Inscribed Circle 3/8 in, TiCN, ANSI Code 2QP-VNGA 331-L BXM20, Chip-Breaker Style Flat Top, Clearance Angle 0 Degrees
| Item | Diamond Turning Insert |
|---|---|
| Insert Shape | Diamond |
| Insert Style | VNGA |
| Inscribed Circle | 3/8 in |
| Insert Size | 331 |
| Chip-Breaker | Yes |
| Grade | BXM20 |
| Corner Radius | 1/64 in |
| Insert Material | CBN |
| Insert Application | Finishing |
| Rake | Negative |
| Cutting Direction | Neutral |
| Non Ferrous (N) Compatibility | No |
| Mounting Hole Dia. | 0.15 in |
| Relief Angle | 0 Degrees |
| Mounting Style | Clamp-On |
| Insert Thickness | 0.187 in |
| Workpiece Compatibility | Hardened (H) |
| Nose Radius | 0.016 in |
| No. of Edges | 2 |
| Super Alloy (S) Compatibility | No |
| Hardened (H) Compatibility | Yes |
| Stainless (M) Compatibility | No |
| Cast Iron (K) Compatibility | No |
| Coating | PVD |
| Steel (P) Compatibility | No |
| Shape | Rhombic |
| Clearance Angle | 0 deg |
| Cutting Application | Finishing |
| Primary Material Application ISO Code | H |
| Chip-Breaker Style | Flat Top |
| Number of Cutting Edges | 2 |
| Features | Light Honing Angle |
| Secondary Material Application ISO Code | H |
| ANSI Code | 2QP-VNGA 331-L BXM20 |
| Included Angle | 35 Degrees |
| Finish - Machining | TiCN |
| Primary Material Application | Hardened Steel |
| Depth of Cut | 0.0197 in |
| Material - Machining | CBN |
| Thickness | 3/16 in |
| Standards | ISO 26623-1 |
| Measurement System | Fractional Inch |
| Secondary Material Application | Hardened Steel |
| Insert Holding Type | Straight Hole |
| Manufacturer Grade | BXM20 |
| Material | CBN |
| Application | Finishing |
| Style | VNGA |
| Fits Chest Size | Light Honing Angle |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |