Indexable Drilling Insert, Relief Angle 11 Degrees , TiAlN, ANSI Code XPMT07H308R-DS AH725, Coating Process PVD, Corner Radius 0.80mm, Hole Dia. 2.80mm
| Item | Indexable Drilling Insert |
|---|---|
| Insert Style | XPMT |
| Primary Material Application | Stainless Steel, Steel |
| Coating | PVD |
| Insert Shape | Parallelogram |
| Cutting Direction | Neutral |
| Measurement System | Decimal Inch |
| Mounting Style | Screw-On |
| Inscribed Circle | 7.00mm |
| Non Ferrous (N) Compatibility | No |
| For Use With | TungDrillTwisted |
| Grade | AH725 |
| Steel (P) Compatibility | Yes |
| Cast Iron (K) Compatibility | Yes |
| Application | Metalworking |
| Super Alloy (S) Compatibility | No |
| Workpiece Compatibility | Cast Iron (K), Stainless (M), Steel (P) |
| Chip-Breaker | Yes |
| Stainless (M) Compatibility | Yes |
| Relief Angle | 11 deg |
| Nose Radius | 0.031 in |
| ISO Number | XPMT07H308R-DS AH725 |
| Hardened (H) Compatibility | No |
| Insert Position | Center, Peripheral |
| Mounting Hole Dia. | 0.11 in |
| Insert Size | 07 |
| Series | TDXU |
| Material - Machining | Carbide |
| Thickness | 3.6 mm |
| Primary Material Application ISO Code | M, P |
| ANSI Code | XPMT07H308R-DS AH725 |
| Hole Dia. | 2.8 mm |
| Number of Cutting Edges | 4 |
| Finish - Machining | TiAlN |
| Corner Radius | 0.80mm |
| Shape | Parallelogram |
| Manufacturer Grade | AH725 |
| Coating Process | PVD |
| Cutting Edge Length | 8.20mm |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |