Hazardous Location Motor, Three Phase, Motor Design Three-Phase, 10 hp HP, Nameplate RPM 1,760 RPM, No. of Speeds 1, Voltage 230/460V AC, Full Load Amps 23.6/11.8 A, 215 Frame, Hz 60 Hz, Max. Ambient Temp. 40 Degrees C, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class F, Hazardous Location Class Class I, Class II, Temp. Code T2B, Motor Enclosure Design Totally Enclosed Fan Cooled, Duty Cycle Continuous, Motor Mounting Type Rigid Base, NEMA Design B, Motor Shaft Rotation CW/CCW
| Motor Design | Three-Phase |
|---|---|
| Phase | Three |
| HP | 10 hp |
| RPM Range | 1,701-1,800 |
| Voltage | 230V AC, 460V AC |
| Frame | 215 |
| Hazardous Location Class | Class I, Class II |
| Motor Thermal Protection | None |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Mounting Type | Rigid Base |
| Item | Hazardous Location Motor |
| Shaft Dia. | 1-3/8 in |
| Ins. Class | F |
| Standards | CSA Certified, UL Listed |
| Overall Length | 20 in |
| Full Load Amps | 23.6/11.8 A |
| Nominal Efficiency | 90.2% |
| Motor Shaft Design | Keyed |
| CC Number | CC030A |
| Length Less Shaft | 16-5/8 in |
| Hz | 60 |
| Nameplate RPM | 1,760 RPM |
| Motor Shaft Rotation | CCW, CW |
| Motor Service Factor | 1 |
| Motor Application | Hazardous Location |
| Max. Ambient Temp. | 40 deg C |
| Motor Mounting Position | Horizontal |
| Shaft Length | 3-3/8 in |
| Motor Frame Material | Cast Iron |
| No. of Speeds | 1 |
| NEMA Design | B |
| Weight | 170 lb |
| Duty Cycle | Continuous |
| Temp. Code | T2B |
| Hazardous Location Division | Division I |
| Hazardous Location Group | Group C, Group D, Group F, Group G |
| Duty Ratio | Not Applicable |
| Full Load Amps @ 50Hz | Not Applicable |
| Voltage @ 50Hz | Not Applicable |
| HP @ 50Hz | Not Applicable |
| RPM @ 50Hz | Not Applicable |
| Maximum Run Time | Not Applicable |
| Service Factor @ 50Hz | Not Applicable |
| Nameplate Horsepower @ 50 Hz | Not Applicable |
| Shaft Design | Keyed |
| Application | Hazardous Location |
| Temperature Code | T2B |
| Frame Size | 215 |
| Run Time - Maximum | Not Applicable |
| Full Load Current @ 60 Hz | 23.6/11.8 A |
| Frame Material | Cast Iron |
| Mounting Position | Horizontal |
| Nameplate Service Factor @ 50 Hz | Not Applicable |
| Nameplate Service Factor @ 60 Hz | 1 |
| NEMA Design Class | B |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Frequency | 60 Hz |
| Wire Rope Length | 20 in |
| Shaft Diameter | 1-3/8 in |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Insulation Class | F |
| Product Type | Hazardous Location Motor |
| Nameplate RPM @ 50 Hz | Not Applicable |
| Ambient Temperature - Maximum | 40 deg C |
| Full Load Current @ 50 Hz | Not Applicable |
| Number of Speeds | 1 |
| Length | 20 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |