Single Vane Pump, Flow Rate - Maximum 17 gpm, Displacement per Revolution 3.39 cu in/rev, Media Intake Connection Size 1 1/2 in, Discharge Connection Size 1 in, Discharge Connection Type Flange, Rotation CW, Mounting Type SAE 4 Bolt Flange, Shaft Type Keyed, Motor Speed - Maximum 1,800 RPM, Shaft Outer Diameter 1 in, Operating Pressure - Maximum 2,500 psi, Housing Material Cast Iron, Media Intake Connection Type SAE Code 61 Flange, Motor Speed - Minimum 1,800 RPM, Overall Height 5.5 in
| Displacement | 3.39 cu in/rev |
|---|---|
| Shaft Size | 1 in |
| Shaft Style | Keyed |
| Mount Type | SAE B 2 Bolt Flange |
| Max. Pressure | 2,500 psi |
| Min. RPM | 600 RPM |
| Max. RPM | 1,800 |
| Application | Lifts, Mobile Equipment, Power Units |
| Inlet Port | 1-1/2 in CD 61 Flange |
| Flow Rate | 17 gpm |
| Shaft Rotation | Right |
| Outlet Port | 1 in CD 61 Flange |
| Item | Single Vane Pump |
| Port Location | Opposite Inlet Port |
| Rotation | CW |
| Overall Height | 5-1/2 in |
| Shaft Outer Diameter | 1 in |
| Media Intake Connection Type | SAE Code 61 Flange |
| Discharge Connection Size | 1 in |
| Motor Speed - Maximum | 1,800 rpm |
| Shaft Type | Keyed |
| Overall Width | 6.9 in |
| Overall Length | 9.8 in |
| Discharge Connection Type | Flange |
| Operating Pressure - Maximum | 2,500 psi |
| Media Intake Connection Size | 1 1/2 in |
| Seal Material | Buna-N |
| Displacement per Revolution | 3.39 cu in/rev |
| Housing Material | Cast Iron |
| Motor Speed - Minimum | 1,800 rpm |
| Flow Rate - Maximum | 17 gpm |
| Spline Shaft Series | Not Applicable |
| Displacement Type | Fixed |
| Mounting Flange Size | SAE B |
| Spline Shaft Number of Teeth | Not Applicable |
| Series | 25V |
| Wire Rope Length | 9.8 in |
| Length | 9.8 in |
| Country of Origin (subject to change) | Sweden |
| Package Quantity | 1 |