Product Description
The Honeywell VRN2ADPXC000 is a pressure independent control valve designed for efficient flow and temperature management in hydronic systems. This valve features a quarter turn electric actuator for precise operation and is capable of maintaining constant flow even with variations in piping pressures. Its integrated pressure control cartridge allows for effective flow balancing.
1/2 inch NPT connection
2-way valve with two gallons per minute flow rate
Operates at twenty-four VAC with floating on/off control
Product Highlights
This valve is key for any hydronic system needing reliable temperature control.
Product Information
Standard Information
Brand: Honeywell
Manufacturer: Honeywell
Technical Specifications
MPN: VRN2ADPXC000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: 1/2 inch
Pattern: 2-way
GPM: 2 GPM
Control Signal: Floating, Two Position
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2ADPXC000 is a pressure independent control valve designed for efficient flow and temperature management in hydronic systems. This valve features a quarter turn electric actuator for precise operation and is capable of maintaining constant flow even with variations in piping pressures. Its integrated pressure control cartridge allows for effective flow balancing.
1/2 inch NPT connection
2-way valve with two gallons per minute flow rate
Operates at twenty-four VAC with floating on/off control
Product HighlightsThis valve is key for any hydronic system needing reliable temperature control.Product Information
Standard Information
Brand: Honeywell
Manufacturer: Honeywell
Technical Specifications
MPN: VRN2ADPXC000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: 1/2 inch
Pattern: 2-way
GPM: 2 GPM
Control Signal: Floating, Two Position
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2ADPXC000 is a pressure independent control valve designed for efficient flow and temperature management in hydronic systems. This valve features a quarter turn electric actuator for precise operation and is capable of maintaining constant flow even with variations in piping pressures. Its integrated pressure control cartridge allows for effective flow balancing.
1/2 inch NPT connection
2-way valve with two gallons per minute flow rate
Operates at twenty-four VAC with floating on/off control
Product HighlightsThis valve is key for any hydronic system needing reliable temperature control.Product Information
Standard Information
Brand: Honeywell
Manufacturer: Honeywell
Technical Specifications
MPN: VRN2ADPXC000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: 1/2 inch
Pattern: 2-way
GPM: 2 GPM
Control Signal: Floating, Two Position
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Brand: Honeywell
Manufacturer: Honeywell
MPN: VRN2ADPXC000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: 1/2 inch
Pattern: 2-way
GPM: 2 GPM
Control Signal: Floating, Two Position
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2ADPXC000 - honeywell-vrn2adpxc000-pressure-independent-control-valve.json.json
| Brand | Honeywell |
|---|---|
| Manufacturer | Honeywell |
| MPN | VRN2ADPXC000 |
| Valve Type | Dynamic Pressure Regulated Control Valve |
| Connection | NPT |
| Size | 1/2 inch |
| Pattern | 2-way |
| GPM | 2 GPM |
| Control Signal | Floating, Two Position |
| Supply Voltage (Nominal) | 24 VAC |
| Trim Material | Stainless Steel |
| Body Style | Two-way ball valve, straight-through flow, full port with patented flow control insert |
| Pipe Size | 1/2 inch to 3 inch with female NPT pipe fittings |
| Body Pressure Rating (maximum) | 360 psi (2500 kPa) at 250°F (121°C) |
| Controlled Medium | Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam |
| Medium Temperature Range | -22°C to 250°F (-30°C to 121°C) |
| Maximum Differential Pressure | 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve) |
| Close-off Pressure | 100 psid |
| Flow Characteristics | Equal percentage with flow control insert |
| Body | Forged brass (ASTM B283) |
| Flow Optimizer | Laser-milled, glass-reinforced Noryl |
| Trim (ball and stem) | Nickel-chrome plated brass, or stainless steel |
| Stem Seals | EPDM O-ring and Teflon bearings |
| Ball Seals | Reinforced Teflon seals, with EPDM O-rings |
| Regulator | Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing |
| Compatible Actuators | Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20) |
| Minimum Torque Required | 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM) |
| Warranty | 1 year on valves, 5 years on actuators |
| Vendor | HONEYWELL |
| Vendor Raw | HONEYWELL |
| SKU | VRN2ADPXC000 |
| Tipo de producto | Modulating Valves |
| Disponibilidad | In Stock |
| Moneda | USD |
| Handle Shopify | honeywell-vrn2adpxc000-pressure-independent-control-valve |
| Shopify Product ID | 9950771446066 |
| Peso | 4.32 lb |
| Peso gramos | 1960 |
| Tags | AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack |