HONEYWELL VRN2AESA0000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2AESA0000 is a pressure independent control valve designed for efficient flow control. This valve features a half-inch NPT connection and operates with a two-way valve pattern. It offers a flow rate of three gallons per minute. It integrates temperature management, adjusting flow automatically to sustain temperature even when piping pressures change. Suitable for both hot and chilled water applications along with glycol solutions up to fifty percent.

Features a half-inch NPT connection.
Offers a two-way valve pattern.
Provides a flow rate of three gallons per minute.
Product Highlights

This control valve is built with stainless steel trim for durability. It is ideal for heating and cooling systems where precise flow control is needed.

Product Information
Standard Information
Manufacturer Part Number: VRN2AESA0000
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Connection: NPT
Pattern: Two-way
Size: Half inch
GPM: 3 GPM
Trim Material: Stainless Steel
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250F (121C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Minus twenty-two C to 250F (Minus thirty C to 121C)
Maximum Differential Pressure: 1 GPM (half inch valve) to 95 GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three quarters inch (and one inch up to nine GPM)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed
Product DescriptionThe Honeywell VRN2AESA0000 is a pressure independent control valve designed for efficient flow control. This valve features a half-inch NPT connection and operates with a two-way valve pattern. It offers a flow rate of three gallons per minute. It integrates temperature management, adjusting flow automatically to sustain temperature even when piping pressures change. Suitable for both hot and chilled water applications along with glycol solutions up to fifty percent.
Features a half-inch NPT connection.
Offers a two-way valve pattern.
Provides a flow rate of three gallons per minute.
Product HighlightsThis control valve is built with stainless steel trim for durability. It is ideal for heating and cooling systems where precise flow control is needed.Product InformationStandard Information

Manufacturer Part Number: VRN2AESA0000

Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications

Connection: NPT

Pattern: Two-way

Size: Half inch

GPM: 3 GPM

Trim Material: Stainless Steel

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: Half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250F (121C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: Minus twenty-two C to 250F (Minus thirty C to 121C)

Maximum Differential Pressure: 1 GPM (half inch valve) to 95 GPM (three inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three quarters inch (and one inch up to nine GPM)

Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Balancing Valves
Availability Text: In Stock
Manufacturer Part Number: VRN2AESA0000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Pattern: Two-way
Size: Half inch
GPM: 3 GPM
Trim Material: Stainless Steel
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250F (121C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Minus twenty-two C to 250F (Minus thirty C to 121C)
Maximum Differential Pressure: 1 GPM (half inch valve) to 95 GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three quarters inch (and one inch up to nine GPM)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2AESA0000 - honeywell-vrn2aesa0000-pressure-independent-control-valve.json.json