HONEYWELL VRN2AFPX5000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2AFPX5000 is a pressure independent control valve with an electric actuator designed for use in hydronic systems. This valve has a half-inch NPT connection and features a two-way configuration allowing for optimal flow management and temperature control. It operates effectively on twenty-four volts alternating current (VAC) and has a flow rate of four gallons per minute (GPM). The valve ensures both flow control and temperature management even when pressure conditions fluctuate.

Features a half-inch NPT connection and two-way configuration.
Designed for modulating floating control with fail-in-place capabilities.
Compatible with water or glycol solutions up to fifty percent concentration.
Product Highlights

This valve integrates seamlessly in systems with its ability to adjust flow automatically. It maintains a consistent temperature and accommodates varying pressure, providing reliability in system performance.

Product Information
Standard Information
Manufacturer Part Number: VRN2AFPX5000
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Connection: NPT
Size: 1/2 inch
Pattern: 2-way
Flow Rate: 4 GPM
Control Signal: Analog, Floating
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim Material: Stainless Steel
Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators (actuators available factory-installed)
Product DescriptionThe Honeywell VRN2AFPX5000 is a pressure independent control valve with an electric actuator designed for use in hydronic systems. This valve has a half-inch NPT connection and features a two-way configuration allowing for optimal flow management and temperature control. It operates effectively on twenty-four volts alternating current (VAC) and has a flow rate of four gallons per minute (GPM). The valve ensures both flow control and temperature management even when pressure conditions fluctuate.
Features a half-inch NPT connection and two-way configuration.
Designed for modulating floating control with fail-in-place capabilities.
Compatible with water or glycol solutions up to fifty percent concentration.
Product HighlightsThis valve integrates seamlessly in systems with its ability to adjust flow automatically. It maintains a consistent temperature and accommodates varying pressure, providing reliability in system performance.Product InformationStandard Information

Manufacturer Part Number: VRN2AFPX5000

Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications

Connection: NPT

Size: 1/2 inch

Pattern: 2-way

Flow Rate: 4 GPM

Control Signal: Analog, Floating

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim Material: Stainless Steel

Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators (actuators available factory-installed)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Manufacturer Part Number: VRN2AFPX5000
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Size: 1/2 inch
Pattern: 2-way
Flow Rate: 4 GPM
Control Signal: Analog, Floating
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim Material: Stainless Steel
Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators (actuators available factory-installed)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2AFPX5000 - honeywell-vrn2afpx5000-pressure-independent-control-valve.json.json