HONEYWELL VRN2AGSXB102 Pressure Independent Control Valve with Electric Actuator

Product Description

The Honeywell VRN2AGSXB102 is a pressure independent control valve designed for effective flow and temperature regulation. It features a half-inch NPT connection, operates with a two-way valve pattern, and supports a flow rate of five gallons per minute. It is equipped with stainless steel trim and a modulating electric actuator that has fail-open capability. This valve operates on twenty-four volts AC and includes one auxiliary switch housed in a NEMA three R enclosure. It is suitable for controlling both hot and chilled water mixed with up to fifty percent glycol solutions.

Includes a differential pressure regulator ensuring a constant pressure drop across the valve seat.
Features a patented flow control ball insert that employs an equal percentage flow characteristic.
Comes with a removable manual operating handle for immediate control during setup or power outages.
Product Highlights

This valve is crucial for maintaining consistent water flow while handling varying system pressures.

Product Information
Standard Information
Manufacturer Part Number: VRN2AGSXB102
Type: Assembly
Technical Specifications
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1/2 in
GPM: 5 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 in to 3 in with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2AGSXB102 is a pressure independent control valve designed for effective flow and temperature regulation. It features a half-inch NPT connection, operates with a two-way valve pattern, and supports a flow rate of five gallons per minute. It is equipped with stainless steel trim and a modulating electric actuator that has fail-open capability. This valve operates on twenty-four volts AC and includes one auxiliary switch housed in a NEMA three R enclosure. It is suitable for controlling both hot and chilled water mixed with up to fifty percent glycol solutions.
Includes a differential pressure regulator ensuring a constant pressure drop across the valve seat.
Features a patented flow control ball insert that employs an equal percentage flow characteristic.
Comes with a removable manual operating handle for immediate control during setup or power outages.
Product HighlightsThis valve is crucial for maintaining consistent water flow while handling varying system pressures.Product InformationStandard Information

Manufacturer Part Number: VRN2AGSXB102

Type: Assembly
Technical Specifications

Connection: NPT

Input Voltage: 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 1/2 in

GPM: 5 GPM

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 in to 3 in with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN 20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Diverting Valves
Availability Text: In Stock
Manufacturer Part Number: VRN2AGSXB102
Type: Assembly
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 1/2 in
GPM: 5 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 in to 3 in with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2AGSXB102 - honeywell-vrn2agsxb102-pressure-independent-control-valve-with-electric-actuator.json.json