Herramientas de Calidad a Bajo Costo
Sugerencias de Producto
Categorías de Tienda

Honeywell VRN2AHPA0000 Pressure Independent Control Valve

MX$8,980.28 Incluye IVA
- Precios sujetos a cambios sin previo aviso.

Informacion Importante

Marca/Fabricante: HONEYWELL

Product Description

The Honeywell VRN2AHPA0000 is a pressure independent control valve designed to regulate flow for hydronic systems. This valve integrates flow and temperature control, adjusting flow automatically to maintain temperature during pressure changes. It features a pressure control cartridge aimed at balancing flow effectively.

Valve size: one-half inch NPT connection
Flow rate: six gallons per minute
Suitable for water or glycol solutions up to fifty percent
Product Highlights

This valve is ideal for maintaining consistent water temperature in heating and cooling applications.

Product Information
Standard Information
Manufacturer: Honeywell
MPN: VRN2AHPA0000
Technical Specifications
Type: Control Valve
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Pattern: 2-way
GPM: 6 GPM
Trim Material: Brass
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one-half inch to three inches with female NPT fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: one gallon per minute (one-half inch valve) to ninety-five gallons per minute (three-inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch (DN15 to DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three-quarter inch (and one inch up to nine gpm)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2AHPA0000 is a pressure independent control valve designed to regulate flow for hydronic systems. This valve integrates flow and temperature control, adjusting flow automatically to maintain temperature during pressure changes. It features a pressure control cartridge aimed at balancing flow effectively.
Valve size: one-half inch NPT connection
Flow rate: six gallons per minute
Suitable for water or glycol solutions up to fifty percent
Product HighlightsThis valve is ideal for maintaining consistent water temperature in heating and cooling applications.Product InformationStandard Information

Manufacturer: Honeywell

MPN: VRN2AHPA0000
Technical Specifications

Type: Control Valve

Valve Type: Dynamic Pressure Regulated Control Valve

Connection: NPT

Pattern: 2-way

GPM: 6 GPM

Trim Material: Brass

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: one-half inch to three inches with female NPT fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: one gallon per minute (one-half inch valve) to ninety-five gallons per minute (three-inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch (DN15 to DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three-quarter inch (and one inch up to nine gpm)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer: Honeywell
MPN: VRN2AHPA0000
Type: Control Valve
Valve Type: Dynamic Pressure Regulated Control Valve
Connection: NPT
Pattern: 2-way
GPM: 6 GPM
Trim Material: Brass
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: one-half inch to three inches with female NPT fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: one gallon per minute (one-half inch valve) to ninety-five gallons per minute (three-inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch (DN15 to DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three-quarter inch (and one inch up to nine gpm)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2AHPA0000 - honeywell-vrn2ahpa0000-pressure-independent-control-valve.json.json


Métodos de Pago Aceptados

Información adicional sobre MSI.


Mercado Pago

Precio Regular: $ 0.00

Meses Pago por mes
3 $ 0.00
6 $ 0.00
9 $ 0.00
12 $ 0.00

Agregar una reseña