Honeywell VRN2AJPX0000 Pressure Independent Control Valve 1/2 inch NPT

Product Description

The Honeywell VRN2AJPX0000 is a pressure independent control valve with a one half inch NPT connection. This two-way valve is built to regulate water flow effectively in hydronic systems where pressure changes. It has an integrated pressure control cartridge that aids in flow balancing. The valve is appropriate for use with water or glycol solutions, handling concentrations up to fifty percent.

Valve size: one half inch NPT
Flow rate: seven gallons per minute
Brass trim enhances durability
Product Highlights

This control valve is a key component for maintaining efficient thermal performance in hydronic heating systems.

Product Information
Standard Information
Manufacturer: Honeywell
Type: Valve Only
Technical Specifications
Connection: NPT
Trim Material: Brass
Pattern: Two-way
Size: one half inch
GPM: seven gallons per minute
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port
Pipe Size: one half inch to three inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent
Medium Temperature Range: minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit
Maximum Differential Pressure: one gallon per minute to ninety-five gallons per minute
Close-off Pressure: one hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body Material: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim Material: Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105
Minimum Torque Required: Thirty-five lb-in (four Nm) for up to three inches and eighteen lb-in (two Nm) for three fourths inches
Product DescriptionThe Honeywell VRN2AJPX0000 is a pressure independent control valve with a one half inch NPT connection. This two-way valve is built to regulate water flow effectively in hydronic systems where pressure changes. It has an integrated pressure control cartridge that aids in flow balancing. The valve is appropriate for use with water or glycol solutions, handling concentrations up to fifty percent.
Valve size: one half inch NPT
Flow rate: seven gallons per minute
Brass trim enhances durability
Product HighlightsThis control valve is a key component for maintaining efficient thermal performance in hydronic heating systems.Product InformationStandard Information

Manufacturer: Honeywell

Type: Valve Only
Technical Specifications

Connection: NPT

Trim Material: Brass

Pattern: Two-way

Size: one half inch

GPM: seven gallons per minute

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port

Pipe Size: one half inch to three inches with female NPT pipe fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent

Medium Temperature Range: minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit

Maximum Differential Pressure: one gallon per minute to ninety-five gallons per minute

Close-off Pressure: one hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body Material: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim Material: Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105

Minimum Torque Required: Thirty-five lb-in (four Nm) for up to three inches and eighteen lb-in (two Nm) for three fourths inches

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Mixing Valves
Availability Text: In Stock
Manufacturer: Honeywell
Type: Valve Only
Connection: NPT
Trim Material: Nickel-chrome plated brass or stainless steel
Pattern: Two-way
Size: one half inch
GPM: seven gallons per minute
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port
Pipe Size: one half inch to three inches with female NPT pipe fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent
Medium Temperature Range: minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit
Maximum Differential Pressure: one gallon per minute to ninety-five gallons per minute
Close-off Pressure: one hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body Material: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105
Minimum Torque Required: Thirty-five lb-in (four Nm) for up to three inches and eighteen lb-in (two Nm) for three fourths inches
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2AJPX0000 - honeywell-vrn2ajpx0000-pressure-independent-control-valve-1-2-inch-npt.json.json