Honeywell VRN2AJPX5000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2AJPX5000 is a pressure independent control valve designed for efficient flow and temperature management in hydronic systems. This valve comes equipped with a pressure control cartridge, promoting effective flow balancing. It is suitable for installation with Honeywell's direct-coupled actuators.

Features a one-half inch NPT connection and a two-way valve pattern.
Designed to handle flow rates up to seven gallons per minute.
Compatible with Honeywell direct-coupled actuators.
Product Highlights

This valve integrates seamlessly into hydronic systems, enhancing system control and efficiency.

Product Information
Standard Information
Type: Assembly
Connection: NPT
Technical Specifications
Trim Material: Stainless Steel
Pattern: Two-way
Size: One-half inch
Flow Rate: Seven gallons per minute
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One to ninety-five gallons per minute depending on valve size
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 at one-half inch or three-fourths inch only
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches, eighteen lb-in (two Nm) up to three-fourths inches and one inch up to nine gallons per minute
Warranty: One year on valves, five years on actuators
Product DescriptionThe Honeywell VRN2AJPX5000 is a pressure independent control valve designed for efficient flow and temperature management in hydronic systems. This valve comes equipped with a pressure control cartridge, promoting effective flow balancing. It is suitable for installation with Honeywell's direct-coupled actuators.
Features a one-half inch NPT connection and a two-way valve pattern.
Designed to handle flow rates up to seven gallons per minute.
Compatible with Honeywell direct-coupled actuators.
Product HighlightsThis valve integrates seamlessly into hydronic systems, enhancing system control and efficiency.Product InformationStandard Information

Type: Assembly

Connection: NPT
Technical Specifications

Trim Material: Stainless Steel

Pattern: Two-way

Size: One-half inch

Flow Rate: Seven gallons per minute

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: One-half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)

Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: One to ninety-five gallons per minute depending on valve size

Close-off Pressure: One hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 at one-half inch or three-fourths inch only

Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches, eighteen lb-in (two Nm) up to three-fourths inches and one inch up to nine gallons per minute

Warranty: One year on valves, five years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Mixing Valves
Availability Text: In Stock
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: Two-way
Size: One-half inch
Flow Rate: Seven gallons per minute
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One to ninety-five gallons per minute depending on valve size
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 at one-half inch or three-fourths inch only
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches, eighteen lb-in (two Nm) up to three-fourths inches and one inch up to nine gallons per minute
Warranty: One year on valves, five years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2AJPX5000 - honeywell-vrn2ajpx5000-pressure-independent-control-valve.json.json