Honeywell VRN2AJPXC002 Pressure Independent Control Valve with Electric Actuator

Product Description

The Honeywell VRN Series VRN2AJPXC002 is a pressure independent control valve designed for efficient flow and temperature management in hydronic systems. This assembly automatically regulates flow to maintain stable temperatures despite fluctuating piping pressures. It includes an integrated pressure control cartridge, ensuring consistent flow balancing and control.

Valve size: One half inch NPT.
Maximum flow rate: Seven gallons per minute.
Control signal: Floating, Two Position.
Product Highlights

The VRN2AJPXC002 is suitable for a variety of applications and enhances system efficiency significantly.

Product Information
Standard Information
Brand: Honeywell
Manufacturer Part Number: VRN2AJPXC002
Technical Specifications
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Pattern: Two-way
Maximum Flow Rate: 7 GPM
Control Signal: Floating, Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port
Pipe Size: One half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators - Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
Compatible Actuators - Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch
Warranty: 1 year on valves, 5 years on actuators
Trim Material: Stainless Steel
Product DescriptionThe Honeywell VRN Series VRN2AJPXC002 is a pressure independent control valve designed for efficient flow and temperature management in hydronic systems. This assembly automatically regulates flow to maintain stable temperatures despite fluctuating piping pressures. It includes an integrated pressure control cartridge, ensuring consistent flow balancing and control.
Valve size: One half inch NPT.
Maximum flow rate: Seven gallons per minute.
Control signal: Floating, Two Position.
Product HighlightsThe VRN2AJPXC002 is suitable for a variety of applications and enhances system efficiency significantly.Product InformationStandard Information

Brand: Honeywell

Manufacturer Part Number: VRN2AJPXC002
Technical Specifications

Type: Assembly

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Pattern: Two-way

Maximum Flow Rate: 7 GPM

Control Signal: Floating, Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port

Pipe Size: One half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam

Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators - Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*

Compatible Actuators - Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch

Warranty: 1 year on valves, 5 years on actuators

Trim Material: Stainless Steel

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Brand: Honeywell
Manufacturer Part Number: VRN2AJPXC002
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Pattern: Two-way
Maximum Flow Rate: 7 GPM
Control Signal: Floating, Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port
Pipe Size: One half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators - Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
Compatible Actuators - Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch
Warranty: 1 year on valves, 5 years on actuators
Trim Material: Stainless Steel
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2AJPXC002 - honeywell-vrn2ajpxc002-pressure-independent-control-valve-with-electric-actuator.json.json