Honeywell VRN2BBPX4002 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN Series valve, MPN VRN2BBPX4002, controls flow and temperature in hydronic systems. This assembly automatically adjusts flow to maintain temperature during pressure changes. It integrates a pressure control cartridge for effective flow balancing and control.

Features a three-fourth inch NPT connection.
Designed for two-way operation with a flow rate of one gallon per minute.
Operates using a twenty-four VAC supply voltage.
Product Highlights

Efficiently manages hot or chilled water with the capability for up to fifty percent glycol solutions.

Product Information
Standard Information
Manufacturer: Honeywell
MPN: VRN2BBPX4002
Technical Specifications
Type: Control Valve Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-fourth inch
GPM: 1 GPM
Control Signal: Floating, Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-fourth inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to nine GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN Series valve, MPN VRN2BBPX4002, controls flow and temperature in hydronic systems. This assembly automatically adjusts flow to maintain temperature during pressure changes. It integrates a pressure control cartridge for effective flow balancing and control.
Features a three-fourth inch NPT connection.
Designed for two-way operation with a flow rate of one gallon per minute.
Operates using a twenty-four VAC supply voltage.
Product HighlightsEfficiently manages hot or chilled water with the capability for up to fifty percent glycol solutions.Product InformationStandard Information

Manufacturer: Honeywell

MPN: VRN2BBPX4002
Technical Specifications

Type: Control Valve Assembly

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: Three-fourth inch

GPM: 1 GPM

Control Signal: Floating, Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: Half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-fourth inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to nine GPM)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer: Honeywell
MPN: VRN2BBPX4002
Type: Control Valve Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-fourth inch
GPM: 1 GPM
Control Signal: Floating, Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-fourth inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to nine GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BBPX4002 - honeywell-vrn2bbpx4002-pressure-independent-control-valve-assembly.json.json