Honeywell VRN2BDPX8100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BDPX8100 is a pressure independent control valve designed to provide effective flow and temperature management in hydronic systems. Built with a 3/4 inch NPT connection, this valve allows for 2-way flow with a maximum flow rate of 2 GPM. It operates with an electric actuator using a supply voltage of 120VAC to 240VAC.

Features a 3/4 inch NPT connection.
Designed for 2-way flow control with a 2 GPM flow rate.
Operates on a voltage range of 100-250 VAC.
Product Highlights

This valve integrates flow control and temperature control functions, ensuring efficient performance even when piping pressures fluctuate.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2BDPX8100
Technical Specifications
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3/4 in
GPM: 2 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: ML6161, ML7161, MN6105, MN7505, MS6105, MS7505, MS8105; only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Product DescriptionThe Honeywell VRN2BDPX8100 is a pressure independent control valve designed to provide effective flow and temperature management in hydronic systems. Built with a 3/4 inch NPT connection, this valve allows for 2-way flow with a maximum flow rate of 2 GPM. It operates with an electric actuator using a supply voltage of 120VAC to 240VAC.
Features a 3/4 inch NPT connection.
Designed for 2-way flow control with a 2 GPM flow rate.
Operates on a voltage range of 100-250 VAC.
Product HighlightsThis valve integrates flow control and temperature control functions, ensuring efficient performance even when piping pressures fluctuate.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2BDPX8100
Technical Specifications

Type: Assembly

Connection: NPT

Supply Voltage (Nominal): 120 VAC, 240 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: 3/4 in

GPM: 2 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to 50%; not for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: ML6161, ML7161, MN6105, MN7505, MS6105, MS7505, MS8105; only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2BDPX8100
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 120 VAC, 240 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3/4 in
GPM: 2 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: ML6161, ML7161, MN6105, MN7505, MS6105, MS7505, MS8105; only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BDPX8100 - honeywell-vrn2bdpx8100-pressure-independent-control-valve.json.json