Honeywell VRN2BEPXD000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BEPXD000 Pressure Independent Control Valve maintains temperature in hydronic systems. It controls flow automatically to accommodate changes in piping pressures. The integrated pressure control cartridge provides balancing and control of fluid flow.

Available sizes from one half inch to three inch with female NPT connections.
Suitable for water or glycol solutions up to fifty percent.
Includes a differential pressure regulator for maintaining constant pressure.
Product Highlights

This control valve is efficient in managing flow and temperature for hydronic systems, making it ideal for use in HVAC applications.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2BEPXD000
Technical Specifications
Type: Control Valve
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Pattern: 2-way
Size: 3/4 inch
GPM: 3 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch and 1 inch up to 9 gpm
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
Trim Material: Stainless Steel
Product Status: Active
Product DescriptionThe Honeywell VRN2BEPXD000 Pressure Independent Control Valve maintains temperature in hydronic systems. It controls flow automatically to accommodate changes in piping pressures. The integrated pressure control cartridge provides balancing and control of fluid flow.
Available sizes from one half inch to three inch with female NPT connections.
Suitable for water or glycol solutions up to fifty percent.
Includes a differential pressure regulator for maintaining constant pressure.
Product HighlightsThis control valve is efficient in managing flow and temperature for hydronic systems, making it ideal for use in HVAC applications.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2BEPXD000
Technical Specifications

Type: Control Valve

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Pattern: 2-way

Size: 3/4 inch

GPM: 3 GPM

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch and 1 inch up to 9 gpm

Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.

Trim Material: Stainless Steel

Product Status: Active

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Modulating Valves
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2BEPXD000
Type: Control Valve
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Pattern: 2-way
Size: 3/4 inch
GPM: 3 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch and 1 inch up to 9 gpm
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
Trim Material: Stainless Steel
Product Status: Active
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BEPXD000 - honeywell-vrn2bepxd000-pressure-independent-control-valve.json.json