Honeywell VRN2BESXA102 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BESXA102 is a pressure independent control valve assembly equipped with an electric actuator. This valve features a three-fourth inch NPT connection, a two-way valve design, and a three gallons per minute flow rate. It comes with stainless steel trim and offers an on/off control signal with fail-open capabilities.

Features a three-fourth inch NPT connection and two-way valve pattern.
Designed for a three gallons per minute flow rate.
Includes an electric actuator with on/off control and fail-open functionality.
Product Highlights

Ideal for use with water and glycol solutions up to fifty percent concentration, this assembly is housed in a NEMA three R enclosure.

Product Information
Standard Information
Brand: Honeywell
Manufacturer Part Number: VRN2BESXA102
Technical Specifications
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-fourth inch
Flow Rate: Three gallons per minute
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (Minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One gpm (one-half inch valve) to ninety-five gpm (three-inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to nine gpm)
Product DescriptionThe Honeywell VRN2BESXA102 is a pressure independent control valve assembly equipped with an electric actuator. This valve features a three-fourth inch NPT connection, a two-way valve design, and a three gallons per minute flow rate. It comes with stainless steel trim and offers an on/off control signal with fail-open capabilities.
Features a three-fourth inch NPT connection and two-way valve pattern.
Designed for a three gallons per minute flow rate.
Includes an electric actuator with on/off control and fail-open functionality.
Product HighlightsIdeal for use with water and glycol solutions up to fifty percent concentration, this assembly is housed in a NEMA three R enclosure.Product InformationStandard Information

Brand: Honeywell

Manufacturer Part Number: VRN2BESXA102
Technical Specifications

Type: Assembly

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: Three-fourth inch

Flow Rate: Three gallons per minute

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: One-half inch to three inches with female NPT pipe fittings

Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (Minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: One gpm (one-half inch valve) to ninety-five gpm (three-inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to nine gpm)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Brand: Honeywell
Manufacturer Part Number: VRN2BESXA102
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-fourth inch
Flow Rate: Three gallons per minute
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (Minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One gpm (one-half inch valve) to ninety-five gpm (three-inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to nine gpm)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BESXA102 - honeywell-vrn2besxa102-pressure-independent-control-valve.json.json