Honeywell VRN2BFSXD002 VRN Series Pressure Regulated Control Valve Assembly

Product Description

The Honeywell VRN2BFSXD002 is a pressure-regulated control valve assembly designed for efficient flow and temperature management in hydronic systems. It maintains optimal temperature during pressure shifts, making it suitable for various applications. This valve features an integrated pressure control cartridge which helps in flow balancing. It is specifically designed for compatibility with Honeywell direct-coupled actuators.

Features a three-fourths inch NPT connection.
Designed for a flow rate of up to four gallons per minute.
Compatible with Honeywell N05 and S05 series actuators.
Product Highlights

This control valve assembly is essential for regulating water or glycol solutions in heating systems. It ensures precise control over flow and temperature, enhancing system performance.

Product Information
Standard Information
Type: Assembly
Connection: NPT
Technical Specifications
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-fourths inch
Flow Rate: Four gallons per minute
Control Signal: Analog/Floating
Valve Type: Dynamic pressure regulated control valve
Pipe Size: Half inch to three inches with female NPT fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions (up to 50%); not suitable for gases, oil, or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One gallon per minute (half inch valve) to ninety-five gallons per minute (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 (only at half inch or three-fourths inch)
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch (and one inch up to nine gallon per minute)
Warranty: One year on valves, five years on actuators
Product DescriptionThe Honeywell VRN2BFSXD002 is a pressure-regulated control valve assembly designed for efficient flow and temperature management in hydronic systems. It maintains optimal temperature during pressure shifts, making it suitable for various applications. This valve features an integrated pressure control cartridge which helps in flow balancing. It is specifically designed for compatibility with Honeywell direct-coupled actuators.
Features a three-fourths inch NPT connection.
Designed for a flow rate of up to four gallons per minute.
Compatible with Honeywell N05 and S05 series actuators.
Product HighlightsThis control valve assembly is essential for regulating water or glycol solutions in heating systems. It ensures precise control over flow and temperature, enhancing system performance.Product InformationStandard Information

Type: Assembly

Connection: NPT
Technical Specifications

Input Voltage: 24 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: Three-fourths inch

Flow Rate: Four gallons per minute

Control Signal: Analog/Floating

Valve Type: Dynamic pressure regulated control valve

Pipe Size: Half inch to three inches with female NPT fittings

Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions (up to 50%); not suitable for gases, oil, or steam

Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: One gallon per minute (half inch valve) to ninety-five gallons per minute (three inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 (only at half inch or three-fourths inch)

Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch (and one inch up to nine gallon per minute)

Warranty: One year on valves, five years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuator Assemblies
Availability Text: In Stock
Type: Assembly
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-fourths inch
Flow Rate: Four gallons per minute
Control Signal: Analog/Floating
Valve Type: Dynamic pressure regulated control valve
Pipe Size: Half inch to three inches with female NPT fittings
Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions (up to 50%); not suitable for gases, oil, or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One gallon per minute (half inch valve) to ninety-five gallons per minute (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 (only at half inch or three-fourths inch)
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch (and one inch up to nine gallon per minute)
Warranty: One year on valves, five years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BFSXD002 - honeywell-vrn2bfsxd002-vrn-series-pressure-regulated-control-valve-assembly.json.json