HONEYWELL VRN2BGPX7102 Dynamic Pressure Regulated Control Valve Assembly

Product Description

The Honeywell VRN2BGPX7102 is a dynamic pressure-regulated control valve assembly designed for effective flow and temperature control in hydronic systems. This valve incorporates an integrated pressure control cartridge for flow balancing, suitable for both water and glycol solutions up to fifty percent.

Features a 2-way ball valve that supports straight-through flow.
Equipped with a patented flow control insert for optimized performance.
Compatible with various Honeywell actuators including ML6161, ML7161, MN6105, MN7505, MS6105, MS7505, and MS8105 series.
Product Highlights

This unit is built with a forged brass body and includes female NPT connections, ensuring durability and reliability in various applications.

Product Information
Standard Information
Type: Assembly
Connection: NPT
Technical Specifications
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: Three fourths inch
GPM: 5 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: One GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three fourths inch (and one inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Product DescriptionThe Honeywell VRN2BGPX7102 is a dynamic pressure-regulated control valve assembly designed for effective flow and temperature control in hydronic systems. This valve incorporates an integrated pressure control cartridge for flow balancing, suitable for both water and glycol solutions up to fifty percent.
Features a 2-way ball valve that supports straight-through flow.
Equipped with a patented flow control insert for optimized performance.
Compatible with various Honeywell actuators including ML6161, ML7161, MN6105, MN7505, MS6105, MS7505, and MS8105 series.
Product HighlightsThis unit is built with a forged brass body and includes female NPT connections, ensuring durability and reliability in various applications.Product InformationStandard Information

Type: Assembly

Connection: NPT
Technical Specifications

Input Voltage: 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: Three fourths inch

GPM: 5 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: One half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: One GPM (one half inch valve) to ninety-five GPM (three inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three fourths inch (and one inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Hydraulic Air Separators
Availability Text: In Stock
Type: Assembly
Connection: NPT
Input Voltage: 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: Three fourths inch
GPM: 5 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: One GPM (one half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three fourths inch (and one inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BGPX7102 - honeywell-vrn2bgpx7102-dynamic-pressure-regulated-control-valve-assembly.json.json