Honeywell VRN2BHSX5002 Dynamic Pressure Regulated Control Valve

Product Description

The Honeywell VRN2BHSX5002 is a dynamic pressure-regulated control valve that integrates flow and temperature control within hydronic systems. This valve automatically adjusts the flow to maintain desired temperatures, compensating for pressure variations in the piping system.

Features a three-quarter inch NPT connection.
Regulates flow up to six gallons per minute.
Compatible with hot or chilled water and glycol solutions up to fifty percent.
Product Highlights

This valve is designed for ease of installation and operation, making it suitable for HVAC professionals.

Product Information
Standard Information
Type: Assembly
Connection: NPT
Technical Specifications
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-quarter inch
GPM: Six gallons per minute
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105, MN7505
Compatible Actuators Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN 20)
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80) and eighteen lb-in (two Nm) up to three-quarters inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Product DescriptionThe Honeywell VRN2BHSX5002 is a dynamic pressure-regulated control valve that integrates flow and temperature control within hydronic systems. This valve automatically adjusts the flow to maintain desired temperatures, compensating for pressure variations in the piping system.
Features a three-quarter inch NPT connection.
Regulates flow up to six gallons per minute.
Compatible with hot or chilled water and glycol solutions up to fifty percent.
Product HighlightsThis valve is designed for ease of installation and operation, making it suitable for HVAC professionals.Product InformationStandard Information

Type: Assembly

Connection: NPT
Technical Specifications

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: Two-way

Size: Three-quarter inch

GPM: Six gallons per minute

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: Half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)

Close-off Pressure: One hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105, MN7505

Compatible Actuators Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN 20)

Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80) and eighteen lb-in (two Nm) up to three-quarters inch (and one inch up to nine GPM)

Warranty: One year on valves, five years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-quarter inch
GPM: Six gallons per minute
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
Close-off Pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105, MN7505
Compatible Actuators Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN 20)
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80) and eighteen lb-in (two Nm) up to three-quarters inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BHSX5002 - honeywell-vrn2bhsx5002-dynamic-pressure-regulated-control-valve.json.json