Honeywell VRN2BHSX6100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BHSX6100 is a pressure independent control valve that features an electric actuator. It is designed to manage flow and temperature in hydronic systems and effectively maintains temperature even when pressure changes. This valve provides automatic flow control, enhancing the efficiency of water systems.

Features a three-fourth inch NPT connection.
Supports a flow rate of six gallons per minute (GPM).
Constructed with stainless steel trim for durability.
Product Highlights

This valve supports modulating floating control and has a fail-safe open functionality. Operating at twenty-four volts alternating current (VAC), it ensures system reliability.

Product Information
Standard Information
Manufacturer: Honeywell
MPN: VRN2BHSX6100
Technical Specifications
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-fourth inch
Flow Rate: Six GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: From one GPM (one-half inch valve) to ninety-five GPM (three inch valve)
Close-off pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch
Warranty: One year on valves, five years on actuators
Weight: Seven pounds
Production Status: Active
Product DescriptionThe Honeywell VRN2BHSX6100 is a pressure independent control valve that features an electric actuator. It is designed to manage flow and temperature in hydronic systems and effectively maintains temperature even when pressure changes. This valve provides automatic flow control, enhancing the efficiency of water systems.
Features a three-fourth inch NPT connection.
Supports a flow rate of six gallons per minute (GPM).
Constructed with stainless steel trim for durability.
Product HighlightsThis valve supports modulating floating control and has a fail-safe open functionality. Operating at twenty-four volts alternating current (VAC), it ensures system reliability.Product InformationStandard Information

Manufacturer: Honeywell

MPN: VRN2BHSX6100
Technical Specifications

Type: Assembly

Connection: NPT

Trim Material: Stainless Steel

Pattern: Two-way

Size: Three-fourth inch

Flow Rate: Six GPM

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: One-half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: From one GPM (one-half inch valve) to ninety-five GPM (three inch valve)

Close-off pressure: One hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch

Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch

Warranty: One year on valves, five years on actuators

Weight: Seven pounds

Production Status: Active

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer: Honeywell
MPN: VRN2BHSX6100
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: Two-way
Size: Three-fourth inch
Flow Rate: Six GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: From one GPM (one-half inch valve) to ninety-five GPM (three inch valve)
Close-off pressure: One hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch
Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch
Warranty: One year on valves, five years on actuators
Weight: Seven pounds
Production Status: Active
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BHSX6100 - honeywell-vrn2bhsx6100-pressure-independent-control-valve.json.json