Herramientas de Calidad a Bajo Costo
Sugerencias de Producto
Categorías de Tienda

HONEYWELL VRN2BLSXB200 Pressure Independent Control Valve

MX$24,738.00 Incluye IVA
- Precios sujetos a cambios sin previo aviso.

Informacion Importante

Marca/Fabricante: HONEYWELL

Product Description

The Honeywell VRN2BLSXB200 is a pressure independent control valve for hydronic systems. It automates flow and temperature control, ensuring temperature stability despite pressure changes. The valve features a pressure control cartridge for optimized flow management. It supports water or glycol solutions with a concentration up to fifty percent.

3/4 inch NPT connection.
Maximum flow rate of nine gallons per minute.
Stainless steel trim for durability.
Product Highlights

This valve is ideal for HVAC systems, providing consistent performance under various pressure conditions.

Product Information
Standard Information
Manufacturer: Honeywell
MPN: VRN2BLSXB200
Technical Specifications
Type: Control Valve
Connection: NPT
Size: 3/4 inch
Pattern: 2-way
GPM: 9 GPM
Trim Material: Stainless Steel
Supply Voltage (Nominal): 24 VAC
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators.
Product DescriptionThe Honeywell VRN2BLSXB200 is a pressure independent control valve for hydronic systems. It automates flow and temperature control, ensuring temperature stability despite pressure changes. The valve features a pressure control cartridge for optimized flow management. It supports water or glycol solutions with a concentration up to fifty percent.
3/4 inch NPT connection.
Maximum flow rate of nine gallons per minute.
Stainless steel trim for durability.
Product HighlightsThis valve is ideal for HVAC systems, providing consistent performance under various pressure conditions.Product InformationStandard Information

Manufacturer: Honeywell

MPN: VRN2BLSXB200
Technical Specifications

Type: Control Valve

Connection: NPT

Size: 3/4 inch

Pattern: 2-way

GPM: 9 GPM

Trim Material: Stainless Steel

Supply Voltage (Nominal): 24 VAC

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)

Warranty: 1 year on valves, 5 years on actuators.

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Valve Actuators
Availability Text: In Stock
Manufacturer: Honeywell
MPN: VRN2BLSXB200
Type: Control Valve
Connection: NPT
Size: 3/4 inch
Pattern: 2-way
GPM: 9 GPM
Trim Material: Stainless Steel
Supply Voltage (Nominal): 24 VAC
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
Warranty: 1 year on valves, 5 years on actuators.
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BLSXB200 - honeywell-vrn2blsxb200-pressure-independent-control-valve.json.json


Métodos de Pago Aceptados

Información adicional sobre MSI.


Mercado Pago

Precio Regular: $ 0.00

Meses Pago por mes
3 $ 0.00
6 $ 0.00
9 $ 0.00
12 $ 0.00

Agregar una reseña