Honeywell VRN2BMPXA202 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BMPXA202 is a pressure independent control valve engineered for efficient flow management in hydronic systems. This valve utilizes an electric actuator for precise control of flow and temperature. It integrates a pressure control cartridge, ensuring effective flow balancing across systems.

Features a three-quarter inch NPT connection and two-way valve pattern.
Designed for a ten GPM flow rate, operating on 24 VAC.
Includes one auxiliary switch and is housed in a NEMA 3R enclosure.
Product Highlights

The Honeywell VRN2BMPXA202 is ideal for managing water or glycol solutions, ensuring regulatory compliance and efficient system operation.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2BMPXA202
Technical Specifications
Manufacturer Part Number: VRN2BMPXA202
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: Three-quarter inch
Flow Rate: 10 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (half inch valve) to 95 GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80)
Product DescriptionThe Honeywell VRN2BMPXA202 is a pressure independent control valve engineered for efficient flow management in hydronic systems. This valve utilizes an electric actuator for precise control of flow and temperature. It integrates a pressure control cartridge, ensuring effective flow balancing across systems.
Features a three-quarter inch NPT connection and two-way valve pattern.
Designed for a ten GPM flow rate, operating on 24 VAC.
Includes one auxiliary switch and is housed in a NEMA 3R enclosure.
Product HighlightsThe Honeywell VRN2BMPXA202 is ideal for managing water or glycol solutions, ensuring regulatory compliance and efficient system operation.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2BMPXA202
Technical Specifications

Manufacturer Part Number: VRN2BMPXA202

Type: Assembly

Connection: NPT

Supply Voltage (Nominal): 24 VAC

Trim Material: Stainless Steel

Pattern: 2-way

Size: Three-quarter inch

Flow Rate: 10 GPM

Control Signal: Two Position

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port

Pipe Size: Half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or Glycol solutions up to 50%

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 GPM (half inch valve) to 95 GPM (three inch valve)

Close-off Pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch

Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80)

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Fan Coil Valves
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2BMPXA202
Manufacturer Part Number: VRN2BMPXA202
Type: Assembly
Connection: NPT
Supply Voltage (Nominal): 24 VAC
Trim Material: Stainless Steel
Pattern: 2-way
Size: Three-quarter inch
Flow Rate: 10 GPM
Control Signal: Two Position
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port
Pipe Size: Half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or Glycol solutions up to 50%
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 GPM (half inch valve) to 95 GPM (three inch valve)
Close-off Pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch
Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80)
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BMPXA202 - honeywell-vrn2bmpxa202-pressure-independent-control-valve.json.json