Honeywell VRN2BMSX6100 Dynamic Pressure Regulated Control Valve

Product Description

The Honeywell VRN2BMSX6100 is a dynamic pressure regulated control valve designed for efficient flow and temperature management. It is ideal for hydronic systems where maintaining consistent temperature is critical. This valve integrates an advanced pressure control cartridge ensuring precision flow balancing.

Compatible with Honeywell direct-coupled actuators
Handles hot or chilled water with up to fifty percent glycol solutions
Built with stainless steel trim and designed in a two-way pattern
Product Highlights

Utilizing this valve can significantly enhance system efficiency during pressure fluctuations, ensuring optimal performance in both residential and commercial applications.

Product Information
Standard Information
Brand: Honeywell
MPN: VRN2BMSX6100
Technical Specifications
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3/4 inch
GPM: 10 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed
Product DescriptionThe Honeywell VRN2BMSX6100 is a dynamic pressure regulated control valve designed for efficient flow and temperature management. It is ideal for hydronic systems where maintaining consistent temperature is critical. This valve integrates an advanced pressure control cartridge ensuring precision flow balancing.
Compatible with Honeywell direct-coupled actuators
Handles hot or chilled water with up to fifty percent glycol solutions
Built with stainless steel trim and designed in a two-way pattern
Product HighlightsUtilizing this valve can significantly enhance system efficiency during pressure fluctuations, ensuring optimal performance in both residential and commercial applications.Product InformationStandard Information

Brand: Honeywell

MPN: VRN2BMSX6100
Technical Specifications

Type: Assembly

Connection: NPT

Trim Material: Stainless Steel

Pattern: 2-way

Size: 3/4 inch

GPM: 10 GPM

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings

Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam

Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)

Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)

Close-off pressure: 100 psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass, or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals, with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)

Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)

Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Service Valves
Availability Text: In Stock
Brand: Honeywell
MPN: VRN2BMSX6100
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: 2-way
Size: 3/4 inch
GPM: 10 GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off pressure: 100 psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals, with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2BMSX6100 - honeywell-vrn2bmsx6100-dynamic-pressure-regulated-control-valve.json.json