HONEYWELL VRN2CDPX5000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CDPX5000 is a pressure independent control valve designed to regulate flow in hydronic systems. This valve integrates flow control with temperature control, adjusting flow automatically to maintain the correct temperature even with pressure changes. It can effectively work with water and glycol solutions up to fifty percent concentration.

Connection: one inch NPT
Valve Type: two-way ball valve
Flow rate: two GPM
Product Highlights

This valve combines flow balancing and control in one unit, offering durability and efficiency in temperature management.

Product Information
Standard Information
Manufacturer: Honeywell
MPN: VRN2CDPX5000
Technical Specifications
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: Two-way
Size: One inch
GPM: Two GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: one GPM (one-half inch valve) to ninety-five GPM (three inches valve)
Close-off Pressure: one hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarters inch (DN15 ~ DN20)
Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three-quarters inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Product DescriptionThe Honeywell VRN2CDPX5000 is a pressure independent control valve designed to regulate flow in hydronic systems. This valve integrates flow control with temperature control, adjusting flow automatically to maintain the correct temperature even with pressure changes. It can effectively work with water and glycol solutions up to fifty percent concentration.
Connection: one inch NPT
Valve Type: two-way ball valve
Flow rate: two GPM
Product HighlightsThis valve combines flow balancing and control in one unit, offering durability and efficiency in temperature management.Product InformationStandard Information

Manufacturer: Honeywell

MPN: VRN2CDPX5000
Technical Specifications

Type: Assembly

Connection: NPT

Trim Material: Stainless Steel

Pattern: Two-way

Size: One inch

GPM: Two GPM

Control Signal: Analog, Floating

Valve Type: Dynamic Pressure Regulated Control Valve

Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert

Pipe Size: One-half inch to three inches with female NPT pipe fittings

Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)

Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam

Medium Temperature Range: negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)

Maximum Differential Pressure: one GPM (one-half inch valve) to ninety-five GPM (three inches valve)

Close-off Pressure: one hundred psid

Flow Characteristics: Equal percentage with flow control insert

Body: Forged brass (ASTM B283)

Flow Optimizer: Laser-milled, glass-reinforced Noryl

Trim (ball and stem): Nickel-chrome plated brass or stainless steel

Stem Seals: EPDM O-ring and Teflon bearings

Ball Seals: Reinforced Teflon seals with EPDM O-rings

Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing

Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarters inch (DN15 ~ DN20)

Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three-quarters inch (and one inch up to nine GPM)

Warranty: One year on valves, five years on actuators

Vendor: HONEYWELL
Vendor Raw: HONEYWELL
Product Type: Thermostatic Valves
Availability Text: In Stock
Manufacturer: Honeywell
MPN: VRN2CDPX5000
Type: Assembly
Connection: NPT
Trim Material: Stainless Steel
Pattern: Two-way
Size: One inch
GPM: Two GPM
Control Signal: Analog, Floating
Valve Type: Dynamic Pressure Regulated Control Valve
Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size: One-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range: negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure: one GPM (one-half inch valve) to ninety-five GPM (three inches valve)
Close-off Pressure: one hundred psid
Flow Characteristics: Equal percentage with flow control insert
Body: Forged brass (ASTM B283)
Flow Optimizer: Laser-milled, glass-reinforced Noryl
Trim (ball and stem): Nickel-chrome plated brass or stainless steel
Stem Seals: EPDM O-ring and Teflon bearings
Ball Seals: Reinforced Teflon seals with EPDM O-rings
Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarters inch (DN15 ~ DN20)
Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three-quarters inch (and one inch up to nine GPM)
Warranty: One year on valves, five years on actuators
Tags: AI_Content, handling_time_days_10, handling_time_weeks_4, loc_2, no-air-shipping, Parcel, require-ack
Source file: VRN2CDPX5000 - honeywell-vrn2cdpx5000-pressure-independent-control-valve.json.json